TOSHIBA TELI CORPORATION

Category Menu

Products

  • Industrial Camera
    • Industrial Camera Information
    • USB3.0 Cameras (BU series)
    • USB3.0 Cameras (DU series)
    • GigE (Gigabit Ethernet) Cameras (BG series)
    • Camera Link Cameras(BC series)
    • Camera Link Cameras (CSC series)
    • CoaXPress Cameras  (CSX series)
    • HD Cameras (CSD series)
    • Smart Photo Sensor
    • Analog Cameras (CS series)
    • Accessories
    • Industrial cameras FAQ
  • Camera Scope

TOP > Products > Industrial Camera > USB3.0 Cameras (BU series)

Industrial Camera

Providing a wide range of sensors, camera formats and control methods as well as individual interfaces to meet a wide range of customer needs.

USB3.0 Cameras (BU series)

USB3.0 B&W Camera / Color Camera

BU series

USB3.0 camera BU seriesBU series camera USB vision logo

*BU080 is[Discontinuance]


USB3.0 Vision Camera BU/DU Series Catalog (1.5MB) BU040M BU160M Series Catalog (592KB) Featuring Sony's CMOS Image Sensor 3MP/6MP/12MP Leaflet(712KB)

Here is the image of BU406MN

Visible light Typical Spectral Response

Visible light

Near infrared light

Near infrared light

Typical Spectral Response

Typical Spectral Response

 

*DU series USB3.0 cameras is here.

*BG series Gig-E cameras is here.


Description

This BU series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD or CMOS.
For video output and camera control, the USB 3.0 interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.



Key Features

  • High frame rate

    high frame rate

  • USB3.0 interface
    Video output and camera control are performed via the USB3.0 interface. Data transfer is up to 5Gbps (Maximum) that enables to output uncompressed video data at high frame rate.

    USB3.0 interface

  • USB3 Vision®conformity

    This product is based on USB3 Vision Ver.1.0.
    USB3 Vision

    *USB3 Vision®is AIA(Automated Imaging Association) standard.

  • GenICam Ver2.3 conformity

    This product is based on GenICam Generic Interface for Cameras Ver.2.3.

    *GenICamTM is trade mark of EMVA(European Machine Vision association).

  • IIDC2 Digital Camera Control Specification Ver.1.0.0 conformity

    This product is based on IIDC2 Digital Camera Control Specification Ver.1.0.0.

    *IIDC2 is JIIA(Japan Industrial Imaging Association) standard.

  • e-CON Connector adoption

    The e-CON connector adoption enables to assemble the cable easily without usion special tools.

    *e-CON(Easy & Economy connector) is a sensor connector that is normalized by the manufacturer of the sensor, FA equipment and connector.

  • Scalable

    Selectable video output area. This mode achieves higher frame rate by reducing vertical output area. And reduces occupied data rate of USB bus by reducing horizontal output area.

    Scalable

  • Color processing (BU030C[F]/BU130C[F]/BU302MC[G/F]/BU505MC[G/F])
    Color models have built in color processing. There are RGB, YUV 4:2:2, YUV 4:1:1, Bayer and Mono output modes.
  • Color processing (BU238MC[F]/BU302MC[G/F]/BU505MC[G/F]/BU1203MC[F])
    Color models have built in color processing. Color processing features like white balance are available in Bayer output mode.
  • Global shutter (BU132M/BU205M/BU238M[C/CF]/BU302MG/BU302MC[G/F]/BU406M[C/CF]/BU406MN/
    BU505MG/BU505MC[G/F]/BU1207MG/BU1207MC[G/F])
    As it employs a global electronic shutter similar to a CCD image sensor, clear images of even fast-moving object are obtainable with less blur.
  • Square grid arrangement
    Square grid arrangement of pixels, facilities computation for image processing.
  • Random Trigger Shutter
    The Random Trigger Shutter function provides images in any timing by input of an external trigger signal. Trigger control from PC is available as well.

Specifications

B/W Cameras

B/W Cameras lineup
MODEL Power supply Lens mount Image sensor Effective pixels Remarks
BU031 DC5V C-mount 1/2 type 320K  
BU030 DC5V C-mount 1/3 type 320K  
BU040M
NEW
DC5V C-mount 1/2.9 type 400K CMOS
[Discontinuance]
BU080
DC5V C-mount 1/3 type 800K  
BU130 DC5V C-mount 1/3 type 1.25M  
BU132M DC5V C-mount 1/1.8 type 1.31M CMOS
BU160M
NEW
DC5V C-mount 1/2.9 type 1.60M CMOS
BU205M DC5V C-mount 2/3 type 2.23M CMOS
BU238M DC5V C-mount 1/1.2 type 2.30M CMOS(IMX174)
BU302MG DC5V C-mount 1/1.8 type 3.14M CMOS
with dust-proof glass
BU406M DC5V C-mount 1/1 type 4.19M CMOS
BU406MN
NEW
DC5V C-mount 1/1 type 4.19M CMOS
BU505MG DC5V C-mount 2/3 type 5.01M CMOS
with dust-proof glass
BU602M
NEW
DC5V C-mount 1/2 type 6.29M CMOS
Rolling shutter
BU1207MG
NEW
DC5V C-mount 1.1 type 12.3M CMOS
with dust-proof glass

Color Cameras

Color Cameras lineup
MODEL Power supply Lens mount Image sensor Effective pixels Remarks
BU030C DC5V C-mount 1/3 type 320K without IR cut filter
BU030CF DC5V C-mount 1/3 type 320K with IR cut filter
BU130C DC5V C-mount 1/3 type 1.25M without IR cut filter
BU130CF DC5V C-mount 1/3 type 1.25M with IR cut filter
BU238MC DC5V C-mount 1/1.2 type 2.30M CMOS(IMX174)
without IR cut filter
BU238MCF DC5V C-mount 1/1.2 type 2.30M CMOS(IMX174)
with IR cut filter
BU302MCG DC5V C-mount 1/1.8 type 3.15M CMOS
without IR cut filter
with dust-proof glass
BU302MCF DC5V C-mount 1/1.8 type 3.15M CMOS
with IR cut filter
BU406MC DC5V C-mount 1/1 type 4.19M CMOS
without IR cut filter
BU406MCF DC5V C-mount 1/1 type 4.19M CMOS
with IR cut filter
BU505MCG DC5V C-mount 2/3 type 5.01M CMOS
without IR cut filter
with dust-proof glass
BU505MCF DC5V C-mount 2/3 type 5.01M CMOS
with IR cut filter
BU602MC
NEW
DC5V C-mount 1/2 type 6.29M CMOS
without IR cut filter
with dust-proof glass
Rolling shutter
BU602MCF
NEW
DC5V C-mount 1/2 type 6.29M CMOS
with IR cut filter
Rolling shutter
BU1203MC DC5V C-mount 1/1.7 type 12.0M CMOS
without IR cut filter
Rolling shutter
BU1203MCF DC5V C-mount 1/1.7 type 12.0M CMOS
with IR cut filter
Rolling shutter
BU1207MCG
NEW
DC5V C-mount 1.1 type 12.3M CMOS
with IR cut filter
with dust-proof glass
BU1207MCF
NEW
DC5V C-mount 1.1 type 12.3M CMOS
with IR cut filter

Detail specifications

B/W Cameras

BU031/BU030/BU080/BU130 Specification Table
Model BU031 BU030 BU080 BU130
Imager all-pixel-data-readout interline transfer CCD
Pixel VGA
659(H) x 494(V)
XGA
1034(H) x 779(V)
SXGA
1296(H) x 966(V)
Scanning area 6.52mm x 4.89mm
(1/2 type)
4.88mm x 3.66mm
(1/3 type)
4.81mm x 3.62mm
(1/3 type)
4.86mm x 3.62mm
(1/3 type)
Pixel size 9.9μm x 9.9μm 7.4μm x 7.4μm 4.65μm x 4.65μm 3.75μm x 3.75μm
Interface USB3.0 (Only SuperSpeed is supported)
Scan method Progressive
Image output format Mono 10bit / Mono 8bit
Frame rate 125fps 40fps 30fps
Aspect ratio 4:3
Standard sensitivity 1700lx
F5.6, 1/125s
1700lx
F5.6, 1/40s
1300lx
F8, 1/30s
Minimum sensitivity F1.4, Gain +18dB, Video level 50%
7lx 3lx
Gain 0 to +18dB (default setting 0 dB)
Gamma γ=1.0 to 0.45(default setting γ=1.0)
Power supply DC5V
Power consumption 2.6W
Lens mount C-mount
External dimension 29(W)mm x 29 (H)mm x 13(D)mm
(Not including protrusion)
Mass approx. 27g
Conformity CE, FCC, RoHS, WEEE, GenICam, IIDC2
BU040M/BU132M/BU160M/BU205M Specification Table
Model BU040M BU132M BU160M BU205M
Imager CMOS image sensor
Pixel VGA+
728(H) x 554(V)
1.3M
1280(H) x 1024(V)
SXGA+
1450(H) x 1088(V)
2M
2048(H) x 1088(V)
Scanning area 5.02mm x 3.82mm
(1/2.9 type)
6.78mm x 5.43mm
(1/1.8 type)
5.00mm x 3.85mm
(1/2.9 type)
11.26mm x 5.98mm
(2/3 type)
Pixel size 6.90μm x 6.90μm 5.3μm x 5.3μm 3.45μm x 3.45μm 5.5μm x 5.5μm
Glass / Filter
Interface USB3.0 (Only SuperSpeed is supported)
Scan method Progressive
Electronic shutter method Global shutter
Image output format Mono 12bit / Mono 10bit / Mono 8bit Mono 10bit / Mono 8bit Mono 12bit / Mono 10bit / Mono 8bit Mono 8bit
Frame rate 437fps 61fps 226fps 170fps
Aspect ratio 4:3 5:4 4:3 2:1
Standard sensitivity 2800lx
F5.6, 1/500s
500lx
F5.6, 1/62.5s
3000lx
F5.6, 1/250s
3300lx
F8, 1/200s
Minimum sensitivity F1.4, Gain +24dB, Video level 50% F1.4, Gain +18dB, Video level 50% F1.4, Gain +24dB, Video level 50% F1.4, Gain x8, Video level 50%
6lx 2lx 12lx 7lx
Gain 0 to +24dB
(factory setting: 0dB)
0dB to +18dB
(factory setting: 0dB)
0 to +24dB
(factory setting: 0dB)
x1 to x8
(factory setting: x1)
Gamma γ=1.0 to 0.45 (factory setting γ=1.0)
Power supply DC5V
Power consumption 2.2W (Maximum) 1.7W (Maximum) 2.4W (Maximum) 2.7W (Maximum)
Lens mount C-mount
External dimension 29(W)mm x 29 (H)mm x 16(D)mm
(Not including protrusion)
Mass approx. 33g approx. 32g
Conformity CE, FCC, RoHS, WEEE, GenICam, IIDC2
BU238M/BU302MG/BU406M/BU406MN Specification Table
Model BU238M BU302MG BU406M BU406MN
Imager CMOS image sensor
Pixel 2.3M
1920(H) x 1200(V)
3M
2048(H) x 1536(V)
4M
2048(H) x 2048(V)
Scanning area 11.25mm x 7.03mm
(1/1.2 type)
7.12mm x 5.33mm
(1/1.8 type)
11.26mm x 11.26mm
(1/1 type)
Pixel size 5.86μm x 5.86μm 3.45μm x 3.45μm 5.5μm x 5.5μm
Glass / Filter with dust-proof glass
Interface USB3.0 (Only SuperSpeed is supported)
Scan method Progressive
Electronic shutter method Global shutter
Image output format Mono 8bit Mono 12bit / Mono 10bit / Mono 8bit Mono 8bit
Frame rate 165fps 120fps 90fps
Aspect ratio 16:10 4:3 1:1
Standard sensitivity 3300lx
F8, 1/200s
3250lx
F5.6, 1/120s
3000lx
F11, 1/90s
2400lx
F11, 1/90s
Minimum sensitivity F1.4, Gain +18dB, Video level 50% F1.4, Gain +24dB, Video level 50% F1.4, Gain x8, Video level 50%
7lx 3lx
Gain -6 to +18dB (factory setting: 0dB) 0dB to +24dB (factory setting: 0dB) x1 to x8 (factory setting: x1)
Gamma γ=1.0 to 0.45 (factory setting γ=1.0)
Power supply DC5V
Power consumption 2.9W (Maximum) 3.2W (Maximum) 2.7W (Maximum)
Lens mount C-mount
External dimension 29(W)mm x 29 (H)mm x 16(D)mm
(Not including protrusion)
Mass approx. 32g approx. 33g approx. 32g
Conformity CE, FCC, RoHS, WEEE, GenICam, IIDC2
BU505MG/BU602M/BU1207MG Specification Table
Model BU505MG BU602M BU1207MG
Imager CMOS image sensor
Pixel 5M
2448(H) x 2048(V)
6M
3072(H) x 2048(V)
12M
4096(H) x 3000(V)
Scanning area 8.5mm x 7.09mm
(2/3 type)
6.14mm x 4.9mm
(1/2 type)
14.19mm x 10.34mm
(1.1 type)
Pixel size 3.45μm x 3.45μm 2.4μm x 2.4μm 3.45μm x 3.45μm
Glass / Filter with dust-proof glass with dust-proof glass
Interface USB3.0 (Only SuperSpeed is supported)
Protocol USB3 Vision
Scan method Progressive
Electronic shutter method Global shutter Normal shutter: Rolling reset
Random trigger shutter: Global reset
Global shutter
Image output format Mono 12bit / Mono 10bit / Mono 8bit
Frame rate 75fps 60fps 31fps
Synchronization System Internal / Bus (USB) Internal Internal / Bus (USB)
Aspect ratio 6:5 3:2 4:3
Standard sensitivity 2100lx
F5.6, 1/75s
2100lx
F5.6, 1/62.5s
860lx
F5.6, 1/32s
Minimum sensitivity F1.4, Gain +24dB, Video level 50%
5lx 2lx
Gain 0dB to +24dB (factory setting: 0dB)
Gamma γ=1.0 to 0.45 (factory setting γ=1.0)
External trigger input Low: 0 to 0.5V, High: 2.0 to 24.0V
High active / Low active (factory setting : Low active)
Pulse width: 50μs (minimum)
Power supply DC5V±5%
Power consumption 3.2W (Maximum) 2.4W (Maximum) 3.0W (Maximum)
Lens mount C-mount
External dimension 29(W)mm x 29 (H)mm x 16(D)mm
(Not including protrusion)
Mass approx. 33g approx. 34g
Conformity CE, FCC, RoHS, WEEE, GenICam, IIDC2

Color Cameras

BU030C/BU030CF/BU130C/BU130CF Specification Table
Model BU030C BU030CF BU130C BU130CF
Imager all-pixel-data-readout interline transfer CCD
Pixel VGA
659 (H) x 494 (V)
SXGA
1296 (H) x 966 (V)
Scanning area 4.88mm (H) x 3.66mm (V)
(1/3 type)
4.86mm (H) x 3.62mm (V)
(1/3 type)
Pixel size 7.4μm x 7.4μm 3.75μm x 3.75μm
Color filter RGB primary color mosaic-on-tip color filter
Glass / Filter with IR cut filter with IR cut filter
Interface USB3.0 (Only SuperSpeed is supported)
Scan method Progressive
Image output format YUV4:2:2 16bit / YUV4:1:1 12bit / RGB 24bit / Bayer 10bit / Bayer 8bit / Mono 8bit
Frame rate 125fps 30fps
Aspect ratio 4:3
Standard sensitivity
with IR-cut filter
3500lx
F5.6, 1/125s
1250lx
F5.6, 1/30s
Minimum sensitivity F1.4, Gain +18dB, Video level 50%
14lx 5lx
Gain 0 to +18dB (factory setting 0 dB)
White balance Manual white-balance / One-push white-balance
Gamma γ=1.0 to 0.45 (factory setting γ=1.0)
Power supply DC5V
Power consumption 2.7W (Maximum)
Lens mount C-mount
External dimension 29(W)mm x 29 (H)mm x 13(D)mm
(Not including protrusion)
Mass approx. 27g
Conformity CE, FCC, RoHS, WEEE, GenICam, IIDC2
BU238MC/BU238MCF/BU302MCG/BU302MCF Specification Table
Model BU238MC BU238MCF BU302MCG BU302MCF
Imager CMOS image sensor
Pixel 2.3M
1920 (H) x 1200 (V)
3M
2048 (H) x 1536 (V)
Scanning area 11.25mm (H) x 7.03mm (V)
(1/1.2 type)
7.12mm (H) x 5.33mm (V)
(1/1.8 type)
Pixel size 5.86μm x 5.86μm 3.45μm x 3.45μm
Color filter RGB primary color mosaic-on-tip color filter
Glass / Filter with IR cut filter with dust-proof glass with IR cut filter
Interface USB3.0 (Only SuperSpeed is supported)
Scan method Progressive
Electronic shutter method Global shutter
Image output format Bayer 8bit RGB / BGR / YUV4:2:2 / YUV4:1:1 / Bayer 8bit / Bayer 10bit / Bayer 12bit / Mono 8bit
Frame rate 165fps 120fps
Aspect ratio 16:10 4:3
Standard sensitivity 3700lx
F8, 1/200s
4100lx
F8, 1/200s
2400lx
F4, 1/120s
2650lx
F4, 1/120s
Minimum sensitivity F1.4, Gain +18dB, Video level 50% F1.4, Gain +24dB, Video level 50%
8lx 9lx 10lx 11lx
Gain -6dB to +18dB (factory setting: 0dB) 0dB to +24dB (factory setting: 0dB)
White balance Manual white-balance / One-push white-balance
Gamma γ=1.0 to 0.45 (factory setting γ=1.0)
Power supply DC5V
Power consumption 2.9W (Maximum) 4.0W (Maximum)
Lens mount C-mount
External dimension 29(W)mm x 29 (H)mm x 16(D)mm
(Not including protrusion)
Mass approx. 32g approx. 33g
Conformity CE, FCC, RoHS, WEEE, GenICam, IIDC2
BU406MC/BU406MCF/BU505MCG/BU505MCF Specification Table
Model BU406MC BU406MCF BU505MCG BU505MCF
Imager CMOS image sensor
Pixel 4M
2048 (H) x 2048 (V)
5M
2448 (H) x 2048 (V)
Scanning area 11.26mm (H) x 11.26mm (V)
(1/1 type)
8.50mm (H) x 7.09mm (V)
(2/3 type)
Pixel size 5.5μm x 5.5μm 3.45μm x 3.45μm
Color filter RGB primary color mosaic-on-tip color filter
Glass / Filter with IR cut filter with dust-proof glass with IR cut filter
Interface USB3.0 (Only SuperSpeed is supported)
Scan method Progressive
Electronic shutter method Global shutter
Image output format Bayer 8bit RGB / BGR / YUV4:2:2 / YUV4:1:1 / Bayer 8bit / Bayer 10bit / Bayer 12bit / Mono 8bit
Frame rate 90fps 75fps
Aspect ratio 1:1 6:5
Standard sensitivity 3700lx
F8, 1/90s
4100lx
F8, 1/90s
3000lx
F5.6, 1/75s
3300lx
F5.6, 1/75s
Minimum sensitivity F1.4, Gain x8, Video level 50% F1.4, Gain +24dB, Video level 50%
8lx 9lx 6lx 7lx
Gain x1 to x8 (factory setting: x1) 0dB to +24dBB (factory setting: 0dB)
White balance Manual white-balance / One-push white-balance
Gamma γ=1.0 to 0.45 (factory setting γ=1.0)
Power supply DC5V
Power consumption 2.7W (Maximum) 4.0W (Maximum)
Lens mount C-mount
External dimension 29(W)mm x 29 (H)mm x 16(D)mm
(Not including protrusion)
Mass approx. 32g approx. 33g
Conformity CE, FCC, RoHS, WEEE, GenICam, IIDC2
BU602MC/BU602MCF/BU1203MC/BU1203MCF Specification Table
Model BU602MC BU602MCF BU1203MC BU1203MCF
Imager CMOS image sensor
Pixel 6M
3072 (H) x 2048 (V)
12M
4000 (H) x 3000 (V)
Scanning area 6.14mm (H) x 4.9mm (V)
(1/2 type)
7.53mm (H) x 5.64mm (V)
(1/1.7 type)
Pixel size 2.4μm x 2.4μm 1.85μm x 1.85μm
Color filter RGB primary color mosaic-on-tip color filter
Glass / Filter with IR cut filter with IR cut filter
Interface USB3.0 (Only SuperSpeed is supported)
Protocol USB3 Vision
Scan method Progressive
Electronic shutter method Normal shutter: Rolling reset
Random trigger shutter: Global reset
Image output format RGB / BGR / YUV4:2:2 / YUV4:1:1 / Bayer 8bit / Bayer 10bit / Bayer 12bit / Mono 8bit Bayer 8bit / Mono 8bit
Frame rate 60fps 30fps
Synchronization System Internal
Aspect ratio 3:2 4:3
External trigger input Low: 0 to 0.5V, High: 2.0 to 24.0V
High active / Low active (factory setting : Low active)
Pulse width: 50μs (minimum)
Standard sensitivity 3000lx F5.6, 1/62.5s 3400lx F5.6, 1/62.5s 4200lx F8, 1/30s 4600lx F8, 1/30s
Minimum sensitivity F1.4, Gain +24dB, Video level 50% F1.4, Gain +18dB, Video level 50%
6lx 7lx 13lx 14lx
Gain 0dB to +24dB (factory setting: 0dB) 0dB to +18dB (factory setting: 0dB)
White balance Manual white-balance / One-push white-balance
Gamma γ=1.0 to 0.45 (factory setting γ=1.0)
Power supply DC5V±5%
Power consumption 3.0W (Maximum) 2.7W (Maximum)
Lens mount C-mount
External dimension 29(W)mm x 29 (H)mm x 16(D)mm
(Not including protrusion)
Mass approx. 33g approx. 32g
Conformity CE, FCC, RoHS, WEEE, GenICam, IIDC2
BU1207MCG/BU1207MCF Specification Table
Model BU1207MCG BU1207MCF
Imager CMOS image sensor
Pixel 12M
4096 (H) x 3000 (V)
Scanning area 14.19mm (H) x 10.34mm (V)
(1.1 type)
Pixel size 3.45μm x 3.45μm
Color filter RGB primary color mosaic-on-tip color filter
Glass / Filter with dust-proof glass with IR cut filter
Interface USB3.0 (Only SuperSpeed is supported)
Scan method Progressive
Electronic shutter method Global shutter
Image output format Bayer 8bit / Bayer 10bit/Bayer 12bit
Frame rate 31fps
Aspect ratio 4:3
Standard sensitivity 1150lx, F5.6, 1/31s 1425lx, F5.6, 1/31s
Minimum sensitivity F1.4, Gain +24dB, Video level 50%
3lx
Gain 0dB to +24dB (factory setting: 0dB)
White balance Manual white-balance / One-push white-balance
Gamma γ=1.0 to 0.45 (factory setting γ=1.0)
Power supply DC5V
Power consumption 3.1W (Maximum)
Lens mount C-mount
External dimension 29(W)mm x 29 (H)mm x 16(D)mm
(Not including protrusion)
Mass approx. 34g
Conformity CE, FCC, RoHS, WEEE, GenICam, IIDC2

Documents

Specifications

Operation Manual

Operation Manual (TeliCamSDK)

Thermal design guide line

3D CAD model

3D CAD model
Conditions of CAD data use
  1. CAD data helps efficient designing with various CAD systems.
    Reproduction or use for other purpose than above of CAD data in this site are not allowed.
  2. Some of the CAD data details are simplified.
  3. CAD data is not supposed to be any guaranty of our product specification.
    And, values from downloaded CAD data are not guaranteed to much the values from actual product.
  4. CAD data are subject to change without notice.
  5. Copyright of any of information in CAD data belongs to our company. Replication, modification, disclosure, reprint and transfer to the third party of all or any part of CAD data without prior permission by our company is not allowed.
  6. Our company assumes no responsibility in any damage including lost profit or compensation for damage from the third party etc. which are caused by use, modification or deletion of CAD data.
  7. Regarding the drawing created with CAD data, creator of the drawing should take responsibility of drawings inspection.
3D CAD model list
Type Model name Data (STEP file)
CCD model BU030[C/CF] / BU031
BU080 / BU130[C/CF]
CMOS model BU040M / BU132M
BU160M / BU205M
BU238M[C/CF] / BU302M[G/CG/CF]
BU406M[C/CF] / BU505M[G/CG/CF]
BU1203MC[F] / BU1207M[G/CG/CF]

About the change of GPIO output signal specifications of the BU series

As shown in the following information, GPIO output signal specifications of the BU series will be changed because of improving both noise resistance performance and convenience of use.

  1. Applicable products
    BU030, BU031, BU080, BU130

  2. Changes are follows;
    Changes are follows
    Before change After change
    Output channel 1 channel 2 channel
    Output signal TIMER0 ACTIVE, USER OUTPUT, EXPOSURE ACTIVE, FRAME ACTIVE, FRAME TRANSFER, FRAME TRIGGER WAIT
    Output level LVTTL 5V CMOS
    Polarity High active / Low active (factory setting : Low active)


  3. Serial No. of change applied.
    Change will be applied after the following manufacturing serial number.
    BU0300100131~
    BU0310100061~
    BU0800100041~
    BU1300100196~

  4. Others
    If you already used those products, please confirm carefully compatibility with the input circuit of your systems.
    There is not a problem in particular in case that you apply TTL buffer of +5V to your system.But if you apply LVTTL buffer to your system, please confirm the permissible voltage range of that.

  5. Specifications/Operation Manual before change

    Specifications BU series USB3.0 Old(1,322KB)PDF file

    Operation Manual BU series USB3.0 Old(3,809KB)PDF file



PDF…Opens in separate window.

Software (SDK)

"TeliCamSDK" software is available for BU/DU series which includes Viewer, SDK and sample codes.
By these SDKs you can use functions for Image Acquisitions and Camera setting. SDKs include C language API, and are available for not only C/C++ but also C#, .NET, Borland development environments.
Moreover, SDKs include high performance driver conforming to USB3 Vision.

"TeliCamSDK" is the newest SDK that integrates "TeliU3vSDK" with "TeliGevSDK" for BG series. "TeliCamSDK" includes high level API that reduces the code quantity particularly.

TeliCamSDK

Applied OS

Language bit Windows XP Windows Vista Windows7 Windows8.1 Windows10
-SP3 -SP1
English 32 supported supported supported supported supported
64 supported supported supported supported supported
Japanese 32 supported supported supported supported supported
64 supported supported supported supported supported
  • ·Windows, Windows XP, Windows Vista, Windows 7, Windows 8.1 and Windows 10 is trade mark od Microsoft corporation.
bit Linux
Ubuntu 14.04 LTS amd64 Debian 8.1.0 amd64 Other
32 contact sales contact sales contact sales
64 supported New window supported New window contact sales

Download TeliCamSDK

Please download "TeliCamSDK" from download page.
Download page is Here.

Instruction manual of "TeliU3vViwer" for TeliCamSDK

PDF…Opens in separate window.

Software (Image processing library)


Information of confirmed connection

Connection of image processing library

Image processing library Camera Note
Manufacturer Model BU030
BU031
BU080
BU130
BU030C[F]
BU031C[F]
BU080C[F]
BU130C[F]
BU205M
BU238M
BU302MG
BU406M
BU505MG
BU238MC[F]
BU406MC[F]
COGNEX VisionPro Confirming Confirming Confirming Confirming
Canon IT Solutions Matrox Imaging Library(MIL) 9.0 *(1)
Matrox Imaging Library(MIL) 10.0 Confirmed Confirmed Confirmed Confirmed
MVTec HALCON 11, 12 Confirmed Confirmed Confirmed Confirmed
National Instruments LabVIEW Confirmed Confirmed Confirmed Confirmed
  • *Indicated company name or software name are trademark or registered trademark.
  • *(1)MIL9.0 is not applied USB3.0

Connection confirmation with the Intel Chipset

List of Intel USB3.0 eXtensible host controller which confirmed connection with camera
CPU Chipset Version OS
Intel Core i5-3230M Intel 7 Series / C216, HM76 1.0.8.251 Win7 Pro 64bit
Intel Core i3-3110M Intel 7 Series / C216, HM76 1.0.4.220 Win7 Pro 32bit
Intel Core i3-3110M Intel 7 Series / C216, HM76 1.0.8.251 Win7 Pro 32bit
Intel Core i7-3770 Intel 7 Series / C216, Z77 1.0.5.235 Win7 Pro 32bit
Intel Core i7-3610QM Intel 7 Series / C216, HM76 1.0.4.220 Win7 Pro 32bit

Recommended USB3.0 board

List of board which confirmed connection with camera
Board Chip Note
Manufacturer Model Manufacturer Model
AVALDATA APX-3424-1 RENESAS µPD720202 x 4 4 port
IOI U3X4-PCIE4XE111 FRESCO LOGIC FL1100 x 4 4 port
  • *Indicated company name or product name are trademark or registered trademark.

Recommended USB3.0 cable

Cable length Manufacturer Model Types
3m Hirakawa Hewtech Corp. UB3-ST-SA0-MBS-0300-00K Normal
UB3-HF-SA0-MBS-0300-00K Robot
Oki Electric Cable Co., Ltd. USB3-KR1-A-MBS-030 Robot(*3)
USB3-KT5-A-MBS-030 Robot(*4)
NISSEI ELECTRIC CO., LTD. NU3MBASU3S 3m Normal
NU3MBASU3B 3m Robot
3M Corp. 1U30A-MB2-SA1-300 Normal
5m Hirakawa Hewtech Corp. UB3-ST-SA0-MBS-0500-00K Normal
UB3-HF-SA0-MBS-0500-00K Robot
Oki Electric Cable Co., Ltd. USB3-KR1-A-MBS-050 Robot(*3)
USB3-KT5-A-MBS-050 Robot(*4)
3M Corp. 1U30A-MB2-SA1-500 Normal
20m EverPro Technologies Ltd. Active Optical Cable (AOC hybrid) Robot
  • *1 Indicated company name or product name are trademark or registered trademark.
  • *2 If you would like to use cable longer than 5m, cable made by COMOSS, or cable made by the other manufacture, please ask our sales department.
  • *3 Standard Hi-Flex cable
  • *4 High sliding cable

Evaluation of USB3.0 board and cable

USB3.0 board and cable we recommended are already evaluated combination of our cameras, and passed following test. If you want to buy or need further information, please contact our sales staff or ask from our web 'Contact Us'.

Quality evaluation

  • Error ratio evaluation:

    Using BERT function featuring our CMOS model and no error bit in 100,000 million bit test pattern.

  • Evaluation of continuous running time:

    No failure continuous running 72 hours.

BERT check

* BERT(Bit Error Rate Test) function is checking cable by comparing test pattern provided by camera and loop back data from host controller.


For product details, contact the sales manager or use the inquiry form.

Contact Us  Industrial Camera's FAQ

TOSHIBA TELI CORPORATION Top Page | Protection of Privacy Data | Terms and Conditions of Use

Copyright