Camera Link (PoCL) Camera CSC series (CMOS)
CSC6M100BMP11 / CSC6M100CMP11
- CL/PoCL
- 6.5 MP
- 1.1 type
- GS-CMOS
- B/W
- Color
- 99 fps
Ultra High Resolution Camera installed 6.5 Mega pixels CMOS sensor.
Key Features
- High speed output at High-resolution pixel
- Global electronic shutter
- Random Trigger shutter
- WOI(Window of interest)
- Binning
- PoCL interface
Specifications
| Model | CSC6M100BMP11 | CSC6M100CMP11 |
|---|---|---|
| Color type | B/W max. | Color |
| Interface | Camera Link (PoCL) Base / Medium / Full Configuration | |
| Pixels | 6.5M | |
| Imager | CMOS image sensor | |
| Imager model | TELI Original | |
| Resolution | 2,560(H) x 2,560(V) | |
| Frame rate | Approx. 99fps (Mono 8bit, Full Config 8tap, 84MHz) |
Approx. 99fps (Bayer 8bit, Full Config 8tap, 84MHz) |
| Pixel size | 5.0μm×5.0μm | |
| Scanning area | 12.8mm(H) x 12.8mm(V) | |
| Image size | 1.1 type | |
| Aspect ratio | 1:1 | |
| Scanning | Progressive | |
| Electronic shutter method | Global shutter | |
| Random Trigger Shutter Type | External Trigger | |
| Random Trigger Shutter Mode | Edge / Level | |
| Sequential Shutter | - | |
| Exposure Time | MANUAL: 10μs to 200ms Random Trigger Shutter: 10μs to 200ms (Edge or Bulk mode), 10μs to Trigger width (Pulse mode) |
|
| Synchronization System | Internal | |
| On-chip Color Filter | - | RGB primary color mosaic-on-tip color filter |
| Optical glass/filter | - | - |
| Sensitivity | 900 lx (F5.6, 1/60s) |
2200 lx (F5.6, 1/60s) |
| Minimum illuminance | 8 lx (F2.8, Gain: Max, Video level: 50%) |
20 lx (F2.8, Gain: Max, Video level: 50%) |
| Gain | Analog：0 / +3 / +6 / +9dB switching Digital: 0 to +18dB |
|
| Black Level | 0 to 528DN | |
| Gamma / LUT | γ=OFF, 1 to 16 / In 12bit, Out 10bit | |
| White balance | - | Manual white-balance / One-push white-balance |
| Pixel Clock | 60MHz / 72MHz / 84MHz | |
| Tap Number | 2 / 4 / 8 tap(s) | |
| Image Output Format | Mono 8bit / Mono 10bit / Mono 12bit | Raw 8bit / Raw 10bit / Raw 12bit |
| Readout Mode | All pixel, WOI, Binning, Mirroring, Flip | |
| External trigger input | Camera Link I/F, I/O connector High active / Low active, Pulse width: 10μs (minimum) |
|
| GPIO Input Output | Output: 1 channel | |
| Communication Protocol | Legacy mode | |
| Baud Rate | 9,600bps / 19,200bps / 38,400bps / 57,600bps / 115,200bps | |
| Power supply | DC+12V ±10% | |
| Power consumption | approx. 3.84W max. | |
| Lens mount | C-mount | |
| External dimension | 40(W) x 40(H) x 35(D) mm (Not including protruding parts) | |
| Mass | approx. 100g | |
| Operation temperature | -5℃ ~ 45℃ | |
| Operation humidity | 10 to 90% (no condensation) | |
| Conformity | CE, FCC, RoHS, WEEE, Camera Link, PoCL | |