USB3 Camera BU series (CMOS, Compact)
BU505MG / BU505MCG / BU505MCF
- USB3
- 5 MP
- 2/3 type
- GS-CMOS
- B/W
- Color
- 75 fps
- TeliCore
- Bus synchronization
- Bulk trigger
- image buffer
- Sequential Shutter
- 1.1μs exposure
The BU505M Series is an integrated CMOS camera with a USB 5Gbps (USB3.1 Gen1) interface.
For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This product is a 3 year warranty correspondence.
Key Features
- High frame rate
- USB 5Gbps (USB3.1 Gen1) interface
- USB3 Vision Ver.1.0 conformity
- GenICam conformity Ver2.4 / Ver3.0
- IIDC2 Digital Camera Control Specification Ver.1.1.0
- e-CON Connector adoption
- Scalable
Frame rate calculation tool
(BU series CMOS camera) - Color processing (BU505MCG / BU505MCF)
- Global shutter
- Square grid arrangement
- Random Trigger Shutter
Specifications
B/W Camera
| Model | BU505MG |
|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) |
| Pixels | 5M |
| Imager | CMOS image sensor |
| Imager model | IMX250LLR |
| Resolution | 2,448(H) x 2,048(V) |
| Frame rate | 75fps (Mono 8bit) |
| Pixel size | 3.45μm x 3.45μm |
| Scanning area | 8.45mm(H) x 7.07mm(V) |
| Image size | 2/3 type |
| Aspect ratio | 6:5 |
| Scanning | Progressive |
| Electronic shutter method | MANUAL: Global shutter / Random Trigger Shutter: Global shutter |
| Random Trigger Shutter Type | External Trigger / Software Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | 16 entries (max) |
| Exposure Time | MANUAL: 1.08μs to 14.44μs (Short exposure mode ON), 22μs to 16s (Short exposure mode OFF) Random Trigger Shutter: 22μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
| Synchronization System | Internal / Bus (USB) |
| Optical glass/filter | Dust-proof glass |
| Sensitivity | 2,100 lx (F5.6, 1/75s) |
| Minimum illuminance | 2 lx (F1.4, Gain: +36dB, Video level: 50%) |
| Gain | MANUAL: 0 to +36dB, AGC: 0 to +24dB |
| Black Level | -25% to +25% |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit |
| Image Buffer | 256MB / 53 frames (all pixels readout) |
| Image Output Format | Mono 8bit / Mono 10bit / Mono 12bit |
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
| Power supply | DC5V ±5% |
| Power consumption | 2.9W max. |
| Lens mount | C-mount |
| External dimension | 29(W) x 29(H) x 16(D) mm (Not including protruding parts) |
| Mass | approx. 33g |
| Operation temperature | 0°C to 40°C (below 50°C on cabinet surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 |
Color Cameras
| Model | BU505MCG | BU505MCF |
|---|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) | |
| Pixels | 5M | |
| Imager | CMOS image sensor | |
| Imager model | IMX250LQR | |
| Resolution | 2,448(H) x 2,048(V) | |
| Frame rate | 75fps (Bayer 8bit) | |
| Pixel size | 3.45μm x 3.45μm | |
| Scanning area | 8.45mm(H) x 7.07mm(V) | |
| Image size | 2/3 type | |
| Aspect ratio | 6:5 | |
| Scanning | Progressive | |
| Electronic shutter method | MANUAL: Global shutter / Random Trigger Shutter: Global shutter | |
| Random Trigger Shutter Type | External Trigger / Software Trigger | |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) | |
| Sequential Shutter | 16 entries (max) | |
| Exposure Time | MANUAL: 1.08μs to 14.44μs (Short exposure mode ON), 22μs to 16s (Short exposure mode OFF) Random Trigger Shutter: 22μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
|
| Synchronization System | Internal / Bus (USB) | |
| On-chip Color Filter | RGB primary color mosaic-on-tip color filter | |
| Optical glass/filter | Dust-proof glass | IR Cut Filter |
| Sensitivity | 3,000 lx (F5.6, 1/75s) |
3,300 lx (F5.6, 1/75s) |
| Minimum illuminance | 6 lx (F1.4, Gain: x8, Video level: 50%) |
7 lx (F1.4, Gain: x8, Video level: 50%) |
| Gain | MANUAL: 0 to +24dB | |
| Black Level | -25% to +25% | |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit | |
| White balance | Manual white-balance / One-push white-balance | |
| Image Buffer | 256MB / 53 frames (all pixels readout) | |
| Image Output Format | RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit, Bayer 8bit / Bayer 10bit / Bayer 12bit, Mono 8bit |
|
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip | |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
|
| Power supply | DC5V ±5% | |
| Power consumption | 3.6W max. | |
| Lens mount | C-mount | |
| External dimension | 29(W) x 29(H) x 16(D) mm (Not including protruding parts) | |
| Mass | approx. 33g | |
| Operation temperature | 0°C to 40°C (below 50°C on cabinet surface) | |
| Operation humidity | 10% to 90% (no condensation) | |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 | |
