TOSHIBA TELI CORPORATION

USB3 Camera DU series (CMOS, High performance)

DU1207MG / DU1207MCG / DU1207MCF

USB3 Camera DU series (CMOS, High performance) DU1207M series

USB3 Vision logo

  • USB3
  • 12.3 MP
  • 1.1 type
  • GS-CMOS
  • B/W
  • Color
  • 32 fps
  • TeliCore
  • Bus synchronization
  • Bulk trigger
  • image buffer
  • Sequential Shutter
  • 1.1μs exposure

The DU1207M Series is an integrated CMOS camera with a USB 5Gbps (USB3.1 Gen1) interface.
For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This product is a 3 year warranty correspondence.

See other USB3 Camera DU series

Contact us

Key Features

  • Featuring Teli original IP "Teli Core Technology"
  • High frame rate
  • Global shutter
  • Adjustment by high-quality and high reliability productive facilities
  • USB 5Gbps (USB3.1 Gen1) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver.2.3 / Ver.3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable
  • Color processing (DU1207MCG / DU1207MCF)
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Camera

DU1207MG Specifications table
Model DU1207MG
Interface USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported)
Pixels 12.3M
Imager CMOS image sensor
Imager model IMX253LLR
Resolution 4,096(H) x 3,000(V)
Frame rate 32fps (Mono 8bit)
Pixel size 3.45μm x 3.45μm
Scanning area 14.13mm(H) x 10.35mm(V)
Image size 1.1 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method MANUAL: Global shutter / Random Trigger Shutter: Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 30μs to 16s
Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
Optical glass/filter Dust-proof glass
Sensitivity 860 lx
(F5.6, 1/32s)
Minimum illuminance 2 lx
(F1.4, Gain: +24dB, Video level: 50%)
Gain MANUAL: 0 to +24dB, AGC: 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
Image Buffer 256MB / 21 frames (all pixels readout)
Image Output Format Mono 8bit / Mono 10bit / Mono 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V ±5%
Power consumption 4.0W max.
Lens mount C-mount
External dimension 40(W) x 40(H) x 35(D) mm (Not including protruding parts)
Mass approx. 90g
Operation temperature -5°C to 45°C (below 65°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Color Cameras

DU1207MCG / DU1207MCF Specifications table
Model DU1207MCG DU1207MCF
Interface USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported)
Pixels 12.3M
Imager CMOS image sensor
Imager model IMX253LQR
Resolution 4,096(H) x 3,000(V)
Frame rate 31fps (Bayer 8bit)
Pixel size 3.45μm x 3.45μm
Scanning area 14.13mm(H) x 10.35mm(V)
Image size 1.1 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method MANUAL: Global shutter / Random Trigger Shutter: Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 30μs to 16s
AE: 30μs to 16s
Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter Dust-proof glass IR Cut Filter
Sensitivity 1,150 lx
(F5.6, 1/31s)
1,425 lx
(F5.6, 1/31s)
Minimum illuminance 3 lx
(F1.4, Gain: +24dB, Video level: 50%)
3 lx
(F1.4, Gain: +24dB, Video level: 50%)
Gain MANUAL: 0 to +24dB, AGC: 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
White balance Manual white-balance / One-push white-balance
Image Buffer 256MB / 21 frames (all pixels readout)
Image Output Format RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit,
Bayer 8bit / Bayer 10bit / Bayer 12bit, Mono 8bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V ±5%
Power consumption 4.5W max.
Lens mount C-mount
External dimension 40(W) x 40(H) x 35(D) mm (Not including protruding parts)
Mass approx. 90g
Operation temperature -5°C to 45°C (below 65°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Other Documents

Additional feature (specification change) of "Short time exposure mode" to DU series

"Short time exposure mode" feature which enables higher speed shutter than ever is added to applicable models among our CMOS camera of "DU series".

  1. Applicable products
    DU1207M series(DU1207MG, DU1207MCG, DU1207MCF)
  2. Contents of change
    Contents of change table
    Model Before change After change
    Exposure time Exposure time
    MANUAL AE MANUAL AE
    Short time
    exposure mode
    OFF
    Short time
    exposure mode
    ON
    DU1207M series 30μs - 16s 30μs - 1s 26μs - 16s 1.51μs - 16.11μs 26μs - 1s
    • Please refer specification sheet or instruction manual for details.


  3. Application
    Changes apply after the following serial number.
    Application table
    Model Type Serial No.
    DU1207MG BJ0339A9 ROHS 1100601 or later
    DU1207MCG BJ0340A4 ROHS 1100301 or later
    DU1207MCF BJ0340A4 001 ROHS 1200301 or later
    • Models not listed will be updated sequentially.


Thermal design guide line