Category Menu


  • Industrial Camera
    • Industrial Camera Information
    • USB3.0 Cameras (BU series)
    • USB3.0 Cameras (DU series)
    • GigE (Gigabit Ethernet) Cameras (BG series)
    • Camera Link Cameras(BC series)
    • Camera Link Cameras (CSC series)
    • CoaXPress Cameras  (CSX series)
    • HD Cameras (CSD series)
    • Smart Photo Sensor
    • Analog Cameras (CS series)
    • Accessories
    • Industrial cameras FAQ
  • Camera Scope

TOP > Products > Industrial Camera > Camera Link Cameras (CSC series) > CSC6M100BMP11/CSC6M100CMP11

Industrial Camera

Providing a wide range of sensors, camera formats and control methods as well as individual interfaces to meet a wide range of customer needs.

Camera Link Cameras (CSC series)

6.5Mega pixels(99fps) CMOS B&W Camera / Color Camera


Camera Link cameras CSC6M100BMP11/CSC6M100CMP11 CAMERALink logo


Ultra High Resolution Camera installed 6.5 Mega pixels CMOS sensor.

Key Features

  • High speed output at High-resolution pixel
    The TOSHIBA TELI’s proprietary 1.1 type 6.5Mega pixels High-resolution CMOS sensor outputs the entire 6.5Mega pixels in a speed as 85fps(standard) or 99fps(max.).
  • Global electronic shutter
    Global electronic shutter makes the clear imaging possible even with faster-moving object.
  • Random Trigger shutter
    It is possible to grab and transfer the image on desirable timing by external trigger input.
  • WOI(Window of interest)
    It is possible to read out desirable area by specifying Vertical and Horizontal position.
  • Binning
    By reading 2(H)x 2(V) pixels or 4(H) x 4(V) piels as one pixel,it is posssible to get fasterimage in all area.
  • PoCL interface
    By using a cameralink capable frame grabber board to which power can be supplied,high speed transfer of captured images to PC as well as various types of camera control from the PC are allowed.Power can also supplied to the camera with only one cable.


CSC6M100BMP11/CSC6M100CMP11 Specification Table
Model CSC6M100BMP11 CSC6M100CMP11
Image sensor CMOS image sensor
Active pixel 2560(H) x 2560(V)
Active area 12.8mm(H) x 12.8mm(V) 1.1 type
Pixel size 5.0μm x 5.0μm
B&W / Color B&W Color
Color filter RGB bayer
IR cut filter Nothing
Scan method Progressive
Aspect ratio 1:1
Interface Camera Link
Data format Y RAW(G/R/B/G)
Shutter method Global shutter
Electronic shutter 1/100,000 sec to 1/5 sec
Scan mode All pixel readout: 2560(H) x 2560(V)
 (Approx.70fps@60MHz / Approx.85fps@72MHz / Approx.99fps@84MHz)
Binning 2x2: 1280(H) x 1280(V)
 (Approx.141fps@60MHz / Approx.169fps@72MHz / Approx.197fps@84MHz)
Binning 4x4: 640(H) x 640(V)
 (Approx.281fps@60MHz / Approx.337fps@72MHz / Approx.394fps@84MHz)
WOI: Depends on the window setting
Binning WOI: Depends on the window setting
Sensitivity 900 lx
F5.6, 3000K
2500 lx
F5.6, 5000K
Shutter speed 1/60 sec
Minimum object illuminance 8 lx 20 lx
Reading all pixels, F2.8, shutter speed 1/60 sec, max gain, gamma value 16, image level 50%
GAIN Analog: 0 / +3 / +6 / +9dB switching
Digital: 0 to +18dB (180 steps, 1step = Approx. 0.1dB)
White balance Manual / One-push
Gamma γ = 1.0(OFF), 1 to 16 presets, of LUT
Random trigger shutter Fixed mode / Pulse width mode / Bulk trigger mode
Trigger signal CameraLink I/F or I/O connector input
LVTTL, Pulse width 10μsec or more
Power consumption Approx. 3.84W (in DC12V)
Lens mount C-mount
External dimension 40(W) x 40(H) x 35(D)mm
Weight Approx. 100g
Various Specs CE, FCC



Interface Specification

3D CAD model

3D CAD model
Conditions of CAD data use
  1. CAD data helps efficient designing with various CAD systems.
    Reproduction or use for other purpose than above of CAD data in this site are not allowed.
  2. Some of the CAD data details are simplified.
  3. CAD data is not supposed to be any guaranty of our product specification.
    And, values from downloaded CAD data are not guaranteed to much the values from actual product.
  4. CAD data are subject to change without notice.
  5. Copyright of any of information in CAD data belongs to our company. Replication, modification, disclosure, reprint and transfer to the third party of all or any part of CAD data without prior permission by our company is not allowed.
  6. Our company assumes no responsibility in any damage including lost profit or compensation for damage from the third party etc. which are caused by use, modification or deletion of CAD data.
  7. Regarding the drawing created with CAD data, creator of the drawing should take responsibility of drawings inspection.
3D CAD model list
Model name Data (STEP file)

For product details, contact the sales manager or use the inquiry form.

Contact Us  Industrial Camera's FAQ

TOSHIBA TELI CORPORATION Top Page | Protection of Privacy Data | Terms and Conditions of Use