GigE Camera BG series (CCD)

BG030 / BG030C / BG030CF
BG031 / BG130

GigE Camera BG series (CCD) BG030 series / BG031 / BG130

GigE Vision Logo

  • GigE
  • 0.3 MP
  • 1.3 MP (BG130)
  • 1/3 type (BG030 series)
  • 1/2 type (BG031)
  • 1/3 type (BG130)
  • CCD
  • B/W
  • Color
  • 125 fps
  • 30 fps (BG130)

This BG series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD.
For video output and camera control, the Gigabit Ethernet interface standard "IEEE802.3ab" is adopted for high transfer rate, and it is easy to integrate into industrial equipment.

Key Features

  • High frame rate
  • Gigabit Ethernet interface (Power over Ethernet)
  • GigE Vision conformity
  • GenICam conformity
  • Scalable
  • Color processing (BG030C / BG030CF)
  • All pixel data readout
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Cameras

BG031 / BG030 / BG130 Specifications table
Model BG031 BG030 BG130
Interface Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity
Pixels 0.3M 1.3M
Imager All-pixel-data-readout interline transfer CCD
Imager model ICX414AL ICX424AL ICX445AL
Resolution 640(H) x 480(V) 1,280(H) x 960(V)
Frame rate 125fps 30fps
Pixel size 9.9μm x 9.9μm 7.4μm x 7.4μm 3.75μm x 3.75μm
Scanning area 6.34mm(H) x 4.75mm(V) 4.74mm(H) x 3.55mm(V) 4.80mm(H) x 3.60mm(V)
Image size 1/2 type 1/3 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Timed / TriggerWidth
Sequential Shutter -
Exposure Time MANUAL : 10μs to 16s
Random Trigger Shutter : 10μs to 16s (Timed mode), 200μs to Trigger width (TriggerWidth mode)
MANUAL : 30μs to 16s
Random Trigger Shutter : 30μs to 16s (Timed mode), 200μs to Trigger width (TriggerWidth mode)
Synchronization System Internal
Optical glass/filter -
Sensitivity 1,700 lx
(F5.6, 1/125s)
1,300 lx
(F8, 1/30s)
Minimum illuminance 7 lx
(F1.4, Gain: +18dB, Video level: 50%)
3 lx
(F1.4, Gain: +18dB, Video level: 50%)
Gain 0 to +18dB
Black Level -5% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 10bit, Out 10bit
Image Buffer -
Image Output Format Mono 8bit / Mono 10bit
Readout Mode All pixel, Scalable, Binning, Decimation
External trigger input Low: 0 to 0.5V, High: 3.3 to 24.0V
High active / Low active, Pulse width: 200μs (minimum)
Power supply PoE / DC12V±10%
Power consumption PoE: 3.1W max. / DC12V: 2.7W max. PoE: 2.5W max. / DC12V: 2.2W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 40(D) mm (Not including protruding parts)
Mass approx. 53g
Operation temperature 0°C to 40°C (below 50°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2

Color Cameras

BU030C / BU030CF Specifications table
Model BU030C BU030CF
Interface USB3.1 Gen1 (USB3.0) (Only SuperSpeed is supported)
Pixels 0.3M
Imager All-pixel-data-readout interline transfer CCD
Imager model ICX424AL
Resolution 640(H) x 480(V)
Frame rate 125fps (Bayer 8bit)
Pixel size 7.4μm x 7.4μm
Scanning area 4.74mm(H) x 3.55mm(V)
Image size 1/3 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method MANUAL / Random Trigger Shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter -
Exposure Time MANUAL : 10μs to 16s
Random Trigger Shutter : 10μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter -
Sensitivity 3,500 lx
(F5.6, 1/125s)
4,200 lx
(F5.6, 1/125s)
Minimum illuminance 14 lx
(F1.4, Gain: +18dB, Video level: 50%)
17 lx
(F1.4, Gain: +18dB, Video level: 50%)
Gain MANUAL : 0 to +18dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 10bit, Out 10bit
White balance Manual white-balance / One-push white-balance
Image Buffer -
Image Output Format RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit, Bayer 8bit / Bayer 10bit
Readout Mode All pixel, Scalable
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V±5%
Power consumption 2.7W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 13(D) mm (Not including protruding parts)
Mass approx. 27g
Operation temperature 0°C to 40°C (below 50°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Other Documents

Thermal design guide line