TOSHIBA TELI CORPORATION

GigE Camera BG series

BG300MG / BG300MCG / BG300MCF

BG300MCG : Made-to-order

GigE Camera BG series / BG300M series

GigE Vision Logo

  • GigE
  • 3.1 MP
  • 1/3 type
  • GS-CMOS
  • B/W
  • Color
  • 36 fps
  • TeliCore
  • Bulk trigger
  • image buffer
  • Sequential Shutter

The BG300M Series is an integrated CMOS camera with a Gigabit Ethernet interface.
For video output and camera control, the Gigabit Ethernet interface standard "IEEE802.3ab" is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This product is a 3 year warranty correspondence.

See other GigE Camera BG series

Contact us

Key Features

  • High frame rate
  • Gigabit Ethernet interface (Power over Ethernet)
  • GigE Vision Ver.1.2 conformity
  • GenICam Ver.2.4 / Ver.3.0 conformity
  • IIDC2 Ver.1.1.0 conformity
  • Scalable
  • All pixel data readout
  • Global shutter
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Camera

BG300MG Specifications table
Model BG300MG
Interface Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity
Pixels 3.1M
Imager CMOS image sensor
Imager model IMX900AMR
Resolution 2,048(H) x 1,536(V)
Frame rate 36fps (Mono 8bit)
Pixel size 2.25μm x 2.25μm
Scanning area 4.61mm(H) x 3.46mm(V)
Image size 1/3 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 1.08μs ~ 5.49μs (Short exposure mode ON), 14μs to 16s (Short exposure mode OFF)
AE: 14μs to 1s
Random Trigger Shutter: 14μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal
Optical glass/filter Dust-proof glass
Sensitivity 2,010 lx
(F5.6, 1/83.3s)
Minimum illuminance 1 lx
(F1.4, Gain: +36dB, Video level: 50%)
Gain MANUAL: 0 to +36dB, AGC: 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
Image Buffer 64M Byte
Image Output Format Mono 8bit / Mono 10bit / Mono 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 3.3 to 24.0V
High active / Low active, Pulse width: 200μs (minimum)
Power supply PoE / DC12V ±10%
Power consumption PoE: 3.0W max. / DC12V: 2.4W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 40(D) mm (Not including protruding parts)
Mass approx. 60g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2

Color Cameras

BG300MCG / BG300MCF Specifications table
Model BG300MCG BG300MCF
Interface Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity
Pixels 3.1M
Imager CMOS image sensor
Imager model IMX900AQR
Resolution 2,048(H) x 1,536(V)
Frame rate 36fps (Bayer 8bit, Mono 8bit)
Pixel size 2.25μm x 2.25μm
Scanning area 4.61mm(H) x 3.46mm(V)
Image size 1/3 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 1.08μs ~ 5.49μs (Short exposure mode ON), 14μs to 16s (Short exposure mode OFF)
AE: 14μs to 1s
Random Trigger Shutter: 14μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter Dust-proof glass IR Cut Filter
Sensitivity 2,400 lx
(F5.6, 1/83.3s)
2,870 lx
(F5.6, 1/83.3s)
Minimum illuminance 2 lx
(F1.4, Gain +36dB, Video level 50%)
2 lx
(F1.4, Gain +36dB, Video level 50%)
Gain MANUAL: 0 to +36dB, AGC: 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
White balance Manual white-balance / One-push white-balance
Image Buffer 64M Byte
Image Output Format Bayer 8bit / Bayer 10bit / Bayer 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 3.3 to 24.0V
High active / Low active, Pulse width: 200μs (minimum)
Power supply PoE / DC12V ±10%
Power consumption PoE: 2.4W max. / DC12V: 3.0W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 40(D) mm (Not including protruding parts)
Mass approx. 60g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2

Other Documents

Thermal design guide line