GigE Camera BG series (CMOS)

BG505LMG / BG505LMCG / BG505LMCF

GigE Camera BG series (CMOS) BG505LM series

GigE Vision Logo

  • GigE
  • 5 MP
  • 2/3 type
  • GS-CMOS
  • B/W / Color
  • 22 fps
  • TeliCore
  • Bulk trigger
  • image buffer
  • Sequential Shutter

This BG series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD or CMOS.
For video output and camera control, the Gigabit Ethernet interface standard "IEEE802.3ab" is adopted for high transfer rate, and it is easy to integrate into industrial equipment.

Key Features

  • High frame rate
  • Gigabit Ethernet interface (Power over Ethernet)
  • GigE Vision Ver.1.2 conformity
  • GenICam Ver.2.4 / Ver.3.0 conformity
  • IIDC2 Ver.1.1.0 conformity
  • Scalable
  • Color processing (BG505LMCG / BG505LMCF)
  • All pixel data readout
  • Global shutter
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Camera

BG505LMG Specifications table
Model BG505LMG
Interface Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity
Pixels 5M
Imager CMOS image sensor
Imager model IMX264LLR
Resolution 2,448(H) x 2,048(V)
Frame rate 22fps (Mono 8bit)
Pixel size 3.45μm x 3.45μm
Scanning area 8.45mm(H) x 7.07mm(V)
Image size 2/3 type
Aspect ratio 6:5
Scanning Progressive
Electronic shutter method Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL : 32μs to 16s
AE : 32μs ~ 16s
Random Trigger Shutter : 32μs to 16s (Edge or Bulk mode), 200μs to Trigger width (Level mode)
Synchronization System Internal
Optical glass/filter Dust-proof glass
Sensitivity 2,600 lx
(F11, 1/22s)
Minimum illuminance 2 lx
(F1.4, Gain: +24dB, Video level: 50%)
Gain MANUAL : 0 to +24dB, AGC : 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
Image Buffer 64M Byte
Image Output Format Mono 8bit / Mono 10bit / Mono 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 3.3 to 24.0V
High active / Low active, Pulse width: 200μs (minimum)
Power supply PoE / DC12V±10%
Power consumption PoE: 3.1W max. / DC12V: 2.6W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 40(D) mm (Not including protruding parts)
Mass approx. 60g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2

Color Cameras

BG505LMCG / BG505LMCF Specifications table
Model BG505LMCG BG505LMCF
Interface Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity
Pixels 5M
Imager CMOS image sensor
Imager model IMX264LQR
Resolution 2,448(H) x 2,048(V)
Frame rate 22fps (Bayer 8bit, Mono 8bit)
Pixel size 3.45μm x 3.45μm
Scanning area 8.45mm(H) x 7.07mm(V)
Image size 2/3 type
Aspect ratio 6:5
Scanning Progressive
Electronic shutter method Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL : 32μs to 16s
AE : 32μs ~ 16s
Random Trigger Shutter : 32μs to 16s (Edge or Bulk mode), 200μs to Trigger width (Level mode)
Synchronization System Internal
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter Dust-proof glass IR Cut Filter
Sensitivity 3,100 lx
(F11, 1/22s)
3,200 lx
(F11, 1/22s)
Minimum illuminance 3 lx
(F1.4, Gain +24dB, Video level 50%)
Gain MANUAL : 0 to +24dB, AGC : 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
White balance Manual white-balance / One-push white-balance
Image Buffer 64M Byte
Image Output Format Bayer 8bit / Bayer 10bit / Bayer 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 3.3 to 24.0V
High active / Low active, Pulse width: 200μs (minimum)
Power supply PoE / DC12V±10%
Power consumption PoE: 3.6W max. / DC12V: 2.9W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 40(D) mm (Not including protruding parts)
Mass approx. 60g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2

Other Documents

Thermal design guide line