USB3 Camera BU series (CMOS, Compact, Rolling shutter)
BU2006MG / BU2006MCF
- USB3
- 20 MP
- 1.0 type
- RS-CMOS
- B/W
- Color
- 19 fps
- TeliCore
- Bulk trigger
- image buffer
- Sequential Shutter
The BU2006M Series is an integrated CMOS camera with a USB 5Gbps (USB3.1 Gen1) interface.
For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This product is a 3 year warranty correspondence.
Key Features
- High frame rate
- USB 5Gbps (USB3.1 Gen1) interface
- USB3 Vision Ver.1.0 conformity
- GenICam conformity Ver2.4, Ver3.0
- IIDC2 Digital Camera Control Specification Ver.1.1.0
- e-CON Connector adoption
- Scalable
- Square grid arrangement
- Random Trigger Shutter
Specifications
B/W Cameras
| Model | BU2006MG |
|---|---|
| Interface | USB3.1 Gen1 (Only SuperSpeed is supported) |
| Pixels | 20M |
| Imager | CMOS image sensor |
| Imager model | IMX183CLK |
| Resolution | 5,472(H) x 3,648(V) |
| Frame rate | 19fps (Mono 8bit) |
| Pixel size | 2.40μm x 2.40μm |
| Scanning area | 13.13mm(H) x 8.76mm(V) |
| Image size | 1.0 type |
| Aspect ratio | 3:2 |
| Scanning | Progressive |
| Electronic shutter method | MANUAL: Rolling shutter / Random Trigger Shutter: Global reset |
| Random Trigger Shutter Type | External Trigger / Software Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | 16 entries (max) |
| Exposure Time | MANUAL: 56.4μs to 16s AE: 56.4μs to 1s Random Trigger Shutter: 56.4μs to 16s (Edge or Bulk mode) |
| Synchronization System | Internal |
| Optical glass/filter | Dust-proof glass |
| Sensitivity | 1,210 lx (F5.6, 1/19s) |
| Minimum illuminance | 3 lx (F1.4, Gain: +24dB, Video level: 50%) |
| Gain | MANUAL: 0 to +24dB |
| Black Level | -25% to +25% |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit |
| Image Buffer | 256MB / 12 frames (all pixels readout) |
| Image Output Format | Mono 8bit / Mono 10bit / Mono 12bit |
| Readout Mode | All pixel, Scalable, Binning, Mirroring, Flip |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
| Power supply | DC5V ±5% |
| Power consumption | 2.7W max. |
| Lens mount | C-mount |
| External dimension | 29(W) x 29(H) x 16(D) mm (Not including protruding parts) |
| Mass | approx. 34g |
| Operation temperature | 0°C to 40°C (below 60°C on cabinet surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 |
Color Cameras
| Model | BU2006MCF |
|---|---|
| Interface | USB3.1 Gen1 (Only SuperSpeed is supported) |
| Pixels | 20M |
| Imager | CMOS image sensor |
| Imager model | IMX183CQJ |
| Resolution | 5,472(H) x 3,648(V) |
| Frame rate | 19fps (Bayer 8bit) |
| Pixel size | 2.40μm x 2.40μm |
| Scanning area | 13.13mm(H) x 8.76mm(V) |
| Image size | 1.0 type |
| Aspect ratio | 3:2 |
| Scanning | Progressive |
| Electronic shutter method | MANUAL: Rolling shutter / Random Trigger Shutter: Global reset |
| Random Trigger Shutter Type | External Trigger / Software Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | 16 entries (max) |
| Exposure Time | MANUAL: 56.4μs to 16s AE: 56.4μs to 1s Random Trigger Shutter: 56.4μs to 16s (Edge or Bulk mode) |
| Synchronization System | Internal |
| On-chip Color Filter | RGB primary color mosaic-on-tip color filter |
| Optical glass/filter | IR Cut Filter |
| Sensitivity | 1,940 lx (F5.6, 1/19s) |
| Minimum illuminance | 4 lx (F1.4, ゲイン: +24dB, 映像出力: 50%) |
| Gain | MANUAL: 0 to +24dB |
| Black Level | -25% to +25% |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit |
| White balance | Manual white-balance / One-push white-balance |
| Image Buffer | 256MB / 12 frames (all pixels readout) |
| Image Output Format | RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit, Bayer 8bit / Bayer 10bit / Bayer 12bit, Mono 8bit |
| Readout Mode | All pixel, Scalable, Binning, Mirroring, Flip |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
| Power supply | DC5V ±5% |
| Power consumption | 2.9W max. |
| Lens mount | C-mount |
| External dimension | 29(W) x 29(H) x 16(D) mm (Not including protruding parts) |
| Mass | approx. 34g |
| Operation temperature | 0°C to 40°C (below 60°C on cabinet surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 |
