USB3 Camera BU series (CMOS, Compact)
BU205M
- USB3
- 2.2 MP
- 2/3 type
- GS-CMOS
- B/W
- 170 fps
- TeliCore
- Bus synchronization
- Bulk trigger
- image buffer
- Sequential Shutter
- 1.1μs exposure
The BU205M is an integrated CMOS camera with a USB 5Gbps (USB3.1 Gen1) interface.
For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This product is a 3 year warranty correspondence.
Key Features
- High frame rate
- USB 5Gbps (USB3.1 Gen1) interface
- USB3 Vision Ver.1.0 conformity
- GenICam conformity Ver2.3
- IIDC2 Digital Camera Control Specification Ver.1.0.0
- e-CON Connector adoption
- Scalable
Frame rate calculation tool
(BU series CMOS camera) - Global shutter
- Square grid arrangement
- Random Trigger Shutter
Specifications
B/W Cameras
| Model | BU205M |
|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) |
| Pixels | 2.2M |
| Imager | CMOS image sensor |
| Imager model | CMV2000-3E5M |
| Resolution | 2,048(H) x 1,088(V) |
| Frame rate | 170fps (Mono 8bit) |
| Pixel size | 5.5μm x 5.5μm |
| Scanning area | 11.26mm(H) x 5.98mm(V) |
| Image size | 2/3 type |
| Aspect ratio | 2:1 |
| Scanning | Progressive |
| Electronic shutter method | MANUAL: Global shutter / Random Trigger Shutter: Global shutter |
| Random Trigger Shutter Type | External Trigger / Software Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | 16 entries (max) |
| Exposure Time | MANUAL: 30μs to 16s Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
| Synchronization System | Internal / Bus (USB) |
| Optical glass/filter | - |
| Sensitivity | 3,300 lx (F8, 1/200s) |
| Minimum illuminance | 7 lx (F1.4, Gain: x8, Video level: 50%) |
| Gain | MANUAL: x1 to x8 |
| Black Level | -25% to +25% |
| Gamma / LUT | γ=1.0 to 0.45 / In 10bit, Out 10bit |
| Image Buffer | 256MB / 120 frames (all pixels readout) |
| Image Output Format | Mono 8bit |
| Readout Mode | All pixel, Scalable, Decimation, Mirroring, Flip |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
| Power supply | DC5V ±5% |
| Power consumption | 2.7W max. |
| Lens mount | C-mount |
| External dimension | 29(W) x 29(H) x 16(D) mm (Not including protruding parts) |
| Mass | approx. 32g |
| Operation temperature | 0°C to 40°C (below 50°C on cabinet surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 |
