TOSHIBA TELI CORPORATION

USB3 Camera BU series (CMOS, Compact)

BU502MG / BU502MCF

USB3 Camera BU series (CMOS, Compact) BU502M series

USB3 Vision logo

  • USB3
  • 5 MP
  • 1/1.8 type
  • GS-CMOS
  • B/W
  • Color
  • 74.9 fps
  • TeliCore
  • Bus synchronization
  • Bulk trigger
  • image buffer
  • Sequential Shutter

The BU502M Series is an integrated CMOS camera with a USB 5Gbps (USB3.1 Gen1) interface.
For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This product is a 3 year warranty correspondence.

See other USB3 camera BU series

Contact us

Key Features

  • High frame rate
  • USB 5Gbps (USB3.1 Gen1) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver2.4, Ver3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Cameras

BU502MG Specifications table
Model BU502MG
Interface USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported)
Pixels 5M
Imager CMOS image sensor
Imager model IMX547AAM
Resolution 2,448(H) x 2,048(V)
Frame rate 74.9fps (Mono 8bit)
Pixel size 2.74μm x 2.74μm
Scanning area 6.71mm(H) x 5.61mm(V)
Image size 1/1.8 type
Aspect ratio 6:5
Scanning Progressive
Electronic shutter method MANUAL: Global shutter / Random Trigger Shutter: Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 1.02μs ~ 2.47μs (Short exposure mode ON), 10μs to 16s (Short exposure mode OFF)
Random Trigger Shutter: 10μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
Optical glass/filter Dust-proof glass
Sensitivity 2,710 lx
(F5.6, 1/83.3s)
Minimum illuminance 2 lx
(F1.4, Gain: +36dB, Video level: 50%)
Gain MANUAL: 0 to +36dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
Image Buffer 256MB / 10 frames (all pixels readout)
Image Output Format Mono 8bit / Mono 10bit / Mono 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V ±5%
Power consumption 2.7W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 16(D) mm (Not including protruding parts)
Mass 33g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Color Cameras

BU502MCF Specifications table
Model BU502MCF
Interface USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported)
Pixels 5M
Imager CMOS image sensor
Imager model IMX547AAQ
Resolution 2,448(H) x 2,048(V)
Frame rate 74.9fps (Bayer 8bit)
Pixel size 2.74μm x 2.74μm
Scanning area 6.71mm(H) x 5.61mm(V)
Image size 1/1.8 type
Aspect ratio 6:5
Scanning Progressive
Electronic shutter method MANUAL: Global shutter / Random Trigger Shutter: Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 1.02μs ~ 2.47μs (Short exposure mode ON), 10μs to 16s (Short exposure mode OFF)
Random Trigger Shutter: 10μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter IR Cut Filter
Sensitivity 2,390 lx
(F4, 1/83.3s)
Minimum illuminance 3 lx
(F1.4, Gain: +36dB, Video level: 50%)
Gain MANUAL: 0 to +36dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
White balance Manual white-balance / One-push white-balance
Image Buffer 256MB / 10 frames (all pixels readout)
Image Output Format Bayer 8bit / Bayer 10bit / Bayer 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V ±5%
Power consumption 2.7W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 16(D) mm (Not including protruding parts)
Mass 33g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2