USB3 Camera DU series (CMOS, High performance)

DU657M / DU657MC

USB3 Camera DU series (CMOS, High performance) DU657M series

USB3 Vision logo

  • USB3
  • 6.5 MP
  • 1.1 type
  • GS-CMOS
  • B/W
  • Color
  • 55 fps
  • TeliCore
  • Bus synchronization
  • Bulk trigger
  • image buffer
  • Sequential Shutter

This DU series is an integrated-(one-body)-type camera that adopts High-resolution CMOS sensor. Suffix [C] is attached to the color models. For video output and camera control, the USB3.1 Gen1 (USB3.0) interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.

Key Features

  • Featuring Teli original IP "Teli Core Technology"
  • High frame rate
  • Global shutter
  • Adjustment by high-quality and high reliability productive facilities
  • USB3.1 Gen1 (USB3.0) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver.2.3 / Ver.3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable
  • Color processing (DU657MC)
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Camera

DU657M Specifications table
Model DU657M
Interface USB3.1 Gen1 (USB3.0) (Only SuperSpeed is supported)
Pixels 6.5M
Imager CMOS image sensor
Imager model TELI Original
Resolution 2,560(H) x 2,560(V)
Frame rate 55fps (Mono 8bit)
Pixel size 5.0μm x 5.0μm
Scanning area 12.80mm(H) x 12.80mm(V)
Image size 1.1 type
Aspect ratio 1:1
Scanning Progressive
Electronic shutter method MANUAL : Global shutter / Random Trigger Shutter : Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL : 10μs to 200ms
Random Trigger Shutter : 10μs to 200ms (Edge or Bulk mode), 10μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
Optical glass/filter -
Sensitivity 900 lx
(F5.6, 1/60s)
Minimum illuminance 16 lx
(F2.8, Gain: x8, Video level: 50%)
Gain MANUAL : x1 to x8
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 10bit, Out 10bit
Image Buffer 64MB / 10 frames (all pixels readout)
Image Output Format Mono 8bit
Readout Mode All pixel, Scalable, Binning, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 10μs (minimum)
Power supply DC5V±5%
Power consumption 3.6W max.
Lens mount C-mount
External dimension 40(W) x 40(H) x 35(D) mm (Not including protruding parts)
Mass approx. 85g
Operation temperature -5°C to 45°C
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Color Camera

DU657MC Specifications table
Model DU657MC
Interface USB3.1 Gen1 (USB3.0) (Only SuperSpeed is supported)
Pixels 6.5M
Imager CMOS image sensor
Imager model TELI Original
Resolution 2,560(H) x 2,560(V)
Frame rate 55fps (Bayer 8bit)
Pixel size 5.0μm x 5.0μm
Scanning area 12.80mm(H) x 12.80mm(V)
Image size 1.1 type
Aspect ratio 1:1
Scanning Progressive
Electronic shutter method MANUAL : Global shutter / Random Trigger Shutter : Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL : 10μs to 200ms
Random Trigger Shutter : 10μs to 200ms (Edge or Bulk mode), 10μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
On-chip Color Filter -
Optical glass/filter -
Sensitivity 2,200 lx
(F5.6, 1/60s)
Minimum illuminance 40 lx
(F2.8, Gain: x8, Video level: 50%)
Gain MANUAL : x1 to x8
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 10bit, Out 10bit
White balance -
Image Buffer 64MB / 10 frames (all pixels readout)
Image Output Format Bayer 8bit
Readout Mode All pixel, Scalable, Binning, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 10μs (minimum)
Power supply DC5V±5%
Power consumption 3.6W max.
Lens mount C-mount
External dimension 40(W) x 40(H) x 35(D) mm (Not including protruding parts)
Mass approx. 85g
Operation temperature -5°C to 45°C
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2