GigE Camera BG series (CMOS)

BG040M / BG040MCG / BG040MCF

GigE Camera BG series (CMOS) BG040M / BG040MCG / BG040MCF

GigE Vision Logo

  • GigE
  • 0.4 MP
  • 1/2.9 type
  • GS-CMOS
  • B/W
  • Color
  • 291 fps
  • TeliCore
  • Bulk trigger
  • image buffer
  • Sequential Shutter
  • 1.1μs exposure

This BG series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD or CMOS.
For video output and camera control, the Gigabit Ethernet interface standard "IEEE802.3ab" is adopted for high transfer rate, and it is easy to integrate into industrial equipment.

Key Features

  • High frame rate
  • Gigabit Ethernet interface (Power over Ethernet)
  • GigE Vision Ver.1.2 conformity
  • GenICam Ver.2.4 / Ver.3.0 conformity
  • IIDC2 Ver.1.1.0 conformity
  • Scalable
  • Color processing (BG040MCG / BG040MCF)
  • All pixel data readout
  • Global shutter
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Cameras

BG040M Specifications table
Model BG040M
Interface Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity
Pixels 0.4M
Imager CMOS image sensor
Imager model IMX287LLR
Resolution 720(H) x 540(V)
Frame rate 291fps (Mono 8bit)
Pixel size 6.9μm x 6.9μm
Scanning area 4.97mm(H) x 3.73mm(V)
Image size 1/2.9 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL : 1.08μs to 13.31μs (Short exposure mode ON), 20μs to 16s (Short exposure mode OFF)
AE : 20μs to 1s
Random Trigger Shutter : 20μs to 16s (Edge or Bulk mode), 200μs to Trigger width (Level mode)
Synchronization System Internal
Optical glass/filter -
Sensitivity 1,890 lx
(F5.6, 1/333s)
Minimum illuminance 1 lx
(F1.4, Gain: +36dB, Video level: 50%)
Gain MANUAL : 0 to +36dB, AGC : 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
Image Buffer 64M Byte
Image Output Format Mono 8bit / Mono 10bit / Mono 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 3.3 to 24.0V
High active / Low active, Pulse width: 200μs (minimum)
Power supply PoE / DC12V±10%
Power consumption PoE: 3.3W max. / DC12V: 2.7W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 40(D) mm (Not including protruding parts)
Mass approx. 59g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2

Color Cameras

BG040MCG / BG040MCF Specifications table
Model BG040MCG BG040MCF
Interface Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity
Pixels 0.4M
Imager CMOS image sensor
Imager model IMX287LLR
Resolution 720(H) x 540(V)
Frame rate 523fps (Bayer 8bit)
Pixel size 6.9μm x 6.9μm
Scanning area 4.97mm(H) x 3.73mm(V)
Image size 1/2.9 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL : 1.08μs to 13.31μs (Short exposure mode ON), 20μs to 16s (Short exposure mode OFF)
AE : 20μs to 1s
Random Trigger Shutter : 20μs to 16s (Edge or Bulk mode), 200μs to Trigger width (Level mode)
Synchronization System Internal
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter Dust-proof glass IR Cut Filter
Sensitivity 1,550 lx
(F4, 1/333s)
1,650 lx
(F4, 1/333s)
Minimum illuminance 2 lx
(F1.4, Gain +36dB, Video level 50%)
Gain MANUAL : 0 to +36dB, AGC : 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
White balance Manual white-balance / One-push white-balance
Image Buffer 64M Byte
Image Output Format Bayer 8bit / Bayer 10bit / Bayer 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 3.3 to 24.0V
High active / Low active, Pulse width: 200μs (minimum)
Power supply PoE / DC12V±10%
Power consumption PoE: 3.4W max. / DC12V: 2.8W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 40(D) mm (Not including protruding parts)
Mass approx. 59g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2

Other Documents

Additional feature (specification change) of "Short time exposure mode" to BG series

"Short time exposure mode" feature which enables higher speed shutter than ever is added to applicable models among our CMOS camera of "BG series".

  1. Applicable products
    BG040M series(BG040M, BG040MCG, BG040MCF)
  2. Contents of change
    Contents of change table
    Model Before change After change
    Exposure time Exposure time
    MANUAL AE MANUAL AE
    Short time
    exposure mode
    OFF
    Short time
    exposure mode
    ON
    BG040M series 30μs - 16s 30μs - 1s 20μs - 16s 1.08μs - 13.31μs 20μs - 1s
    • Please refer specification sheet or instruction manual for details.


  3. Application
    Changes apply after the following serial number.
    Application table
    Model Type Serial No.
    BG040M BJ0655A4 ROHS 1000201 of later
    • Models not listed will be updated sequentially.


Thermal design guide line