USB3 Camera BU series (CCD, Compact)
BU130 / BU130C / BU130CF
[Discontinuance]
- USB3
- 1.3 MP
- 1/3 type
- CCD
- B/W
- Color
- 30 fps
- TeliCore
- Bus synchronization
- Bulk trigger
This BU series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD.
For video output and camera control, the USB 5Gbps (USB3.1 Gen1) interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
Key Features
- High frame rate
- USB 5Gbps (USB3.1 Gen1) interface
- USB3 Vision Ver.1.0 conformity
- GenICam conformity Ver2.3
- IIDC2 Digital Camera Control Specification Ver.1.0.0
- e-CON Connector adoption
- Scalable
Frame rate calculation tool
(BU series CMOS camera) - Color processing (BU130C / BU130CF)
- Square grid arrangement
- Random Trigger Shutter
Specifications
B/W Cameras
| Model | BU130 |
|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) |
| Pixels | 1.3M |
| Imager | All-pixel-data-readout interline transfer CCD |
| Imager model | ICX445AL |
| Resolution | 1,280(H) x 960(V) |
| Frame rate | 30fps (Mono 8bit) |
| Pixel size | 3.75μm x 3.75μm |
| Scanning area | 4.80mm(H) x 3.60mm(V) |
| Image size | 1/3 type |
| Aspect ratio | 4:3 |
| Scanning | Progressive |
| Electronic shutter method | MANUAL / Random Trigger Shutter |
| Random Trigger Shutter Type | External Trigger / Software Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | - |
| Exposure Time | MANUAL: 30μs to 16s Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
| Synchronization System | Internal / Bus (USB) |
| Optical glass/filter | - |
| Sensitivity | 1,300 lx (F8, 1/30s) |
| Minimum illuminance | 3 lx (F1.4, Gain: +18dB, Video level: 50%) |
| Gain | MANUAL: 0 to +18dB |
| Black Level | -25% to +25% |
| Gamma / LUT | γ=1.0 to 0.45 / In 10bit, Out 10bit |
| Image Buffer | - |
| Image Output Format | Mono 8bit / Mono 10bit |
| Readout Mode | All pixel, Scalable |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
| Power supply | DC5V ±5% |
| Power consumption | 2.6W max. |
| Lens mount | C-mount |
| External dimension | 29(W) x 29(H) x 13(D) mm (Not including protruding parts) |
| Mass | approx. 27g |
| Operation temperature | 0°C to 40°C (below 50°C on cabinet surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 |
Color Cameras
| Model | BU130C | BU130CF |
|---|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) | |
| Pixels | 1.3M | |
| Imager | All-pixel-data-readout interline transfer CCD | |
| Imager model | ICX445AQ | |
| Resolution | 4.80mm(H) x 3.60mm(V) | |
| Frame rate | 30fps (Bayer 8bit) | |
| Pixel size | 3.75μm x 3.75μm | |
| Scanning area | 4.80mm(H) x 3.60mm(V) | |
| Image size | 1/3 type | |
| Aspect ratio | 4:3 | |
| Scanning | Progressive | |
| Electronic shutter method | MANUAL / Random Trigger Shutter | |
| Random Trigger Shutter Type | External Trigger / Software Trigger | |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) | |
| Sequential Shutter | - | |
| Exposure Time | MANUAL: 30μs to 16s Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
|
| Synchronization System | Internal / Bus (USB) | |
| On-chip Color Filter | RGB primary color mosaic-on-tip color filter | |
| Optical glass/filter | - | |
| Sensitivity | 1,250 lx (F5.6, 1/30s) |
1,500 lx (F5.6, 1/30s) |
| Minimum illuminance | 5 lx (F1.4, Gain: +18dB, Video level: 50%) |
6 lx (F1.4, Gain: +18dB, Video level: 50%) |
| Gain | MANUAL: 0 to +18dB | |
| Black Level | -25% to +25% | |
| Gamma / LUT | γ=1.0 to 0.45 / In 10bit, Out 10bit | |
| White balance | Manual white-balance / One-push white-balance | |
| Image Buffer | - | |
| Image Output Format | RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit, Bayer 8bit / Bayer 10bit | |
| Readout Mode | All pixel, Scalable | |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
|
| Power supply | DC5V ±5% | |
| Power consumption | 2.7W max. | |
| Lens mount | C-mount | |
| External dimension | 29(W) x 29(H) x 13(D) mm (Not including protruding parts) | |
| Mass | approx. 27g | |
| Operation temperature | 0°C to 40°C (below 50°C on cabinet surface) | |
| Operation humidity | 10% to 90% (no condensation) | |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 | |
Other Documents
About the change of GPIO output signal specifications of the BU series
As shown in the following information, GPIO output signal specifications of the BU series will be changed because of improving both noise resistance performance and convenience of use.
Applicable products
BU130
Contents of change
| Item | Before change | After change |
|---|---|---|
| Output channel | 1 channel | 2 channel |
| Output signal | TIMER0 ACTIVE、USER OUTPUT、EXPOSURE ACTIVE、FRAME ACTIVE、FRAME TRANSFER、FRAME TRIGGER WAIT | |
| Output level | LVTTL | 5V CMOS |
| Polarity | High active / Low active (factory setting: Low active) | |
Serial No. of change applied.
Change will be applied after the following manufacturing serial number.
-
BU130 : 0100196 -
Others
If you already used those products, please confirm carefully compatibility with the input circuit of your systems.
There is not a problem in particular in case that you apply TTL buffer of +5V to your system.But if you apply LVTTL buffer to your system, please confirm the permissible voltage range of that.
Specifications/Operation Manual before change
Manual
Specifications BU series USB3 Old
Operation Manual BU series USB3 Old