TOSHIBA TELI CORPORATION

USB3 Camera BU series (CMOS, Compact)

BU2409MG / BU2409MCG / BU2409MCF

USB3 Camera BU series (CMOS, Compact) BU2409M series

USB3 Vision logo

  • USB3
  • 24.5 MP
  • 1.2 type
  • GS-CMOS
  • B/W
  • Color
  • 15 fps
  • TeliCore
  • Bus synchronization
  • Bulk trigger
  • image buffer
  • Sequential Shutter

The BU2409M Series is an integrated CMOS camera with a USB 5Gbps (USB3.1 Gen1) interface.
For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This product is a 3 year warranty correspondence.

See other USB3 camera BU series

Contact us

Key Features

  • High frame rate
  • USB 5Gbps (USB3.1 Gen1) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver2.4, Ver3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Cameras

BU2409MG Specifications table
Model BU2409MG
Interface USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported)
Pixels 24.5M
Imager CMOS image sensor
Imager model IMX540LLR
Resolution 5,328(H) x 4,608(V)
Frame rate 15fps (Mono 8bit)
Pixel size 2.74μm x 2.74μm
Scanning area 14.60mm(H) x 12.63mm(V)
Image size 1.2 type
Aspect ratio 7:6
Scanning Progressive
Electronic shutter method MANUAL: Global shutter / Random Trigger Shutter: Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 18μs to 16s
Random Trigger Shutter: 18μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
Optical glass/filter Dust-proof glass
Sensitivity 1,950 lx
(F11, 1/20s)
Minimum illuminance 1 lx
(F1.4, Gain: +36dB, Video level: 50%)
Gain MANUAL: 0 to +36dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
Image Buffer 256MB / 10 frames (all pixels readout)
Image Output Format Mono 8bit / Mono 10bit / Mono 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V ±5%
Power consumption 3.3W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 16(D) mm (Not including protruding parts)
Mass approx. 33g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Color Cameras

BU2409MCG / BU2409MCF Specifications table
Model BU2409MCG BU2409MCF
Interface USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported)
Pixels 24.5M
Imager CMOS image sensor
Imager model IMX540LQR
Resolution 5,328(H) x 4,608(V)
Frame rate 15fps (Bayer 8bit)
Pixel size 2.74μm x 2.74μm
Scanning area 14.60mm(H) x 12.63mm(V)
Image size 1.2 type
Aspect ratio 7:6
Scanning Progressive
Electronic shutter method MANUAL: Global shutter / Random Trigger Shutter: Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 18μs to 16s
Random Trigger Shutter: 18μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter Dust-proof glass IR Cut Filter
Sensitivity 1,850 lx
(F8, 1/20s)
2,000 lx
(F8, 1/20s)
Minimum illuminance 1 lx
(F1.4, Gain: +36dB, Video level: 50%)
1 lx
(F1.4, Gain: +36dB, Video level: 50%)
Gain MANUAL: 0 to +36dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
White balance Manual white-balance / One-push white-balance
Image Buffer 256MB / 10 frames (all pixels readout)
Image Output Format Bayer 8bit / Bayer 10bit / Bayer 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V ±5%
Power consumption 3.3W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 16(D) mm (Not including protruding parts)
Mass approx. 33g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Introduction Video


Introduction video of the demonstration at the exhibition "ITE2020" .

Other Documents

Thermal design guide line