Dual USB3 Camera DDU series (CMOS, High performance)

DDU1207MG / DDU1207MCG / DDU1207MCF

Dual USB3 Camera DDU series (CMOS, High performance) DDU1207M series

USB3 Vision logo

  • Dual USB3
  • 12.3 MP
  • 1.1 type
  • GS-CMOS
  • B/W
  • Color
  • 62 fps
  • TeliCore
  • Bus synchronization
  • Bulk trigger
  • image buffer
  • Sequential Shutter

This DU series is an integrated-(one-body)-type camera that adopts High-resolution CMOS sensor.
For video output and camera control, the USB3.1 Gen1 (USB3.0) interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.

Key Features

  • Featuring Teli original IP "Teli Core Technology"
  • High frame rate
  • Global shutter
  • Adjustment by high-quality and high reliability productive facilities
  • USB3.1 Gen1 (USB3.0) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver.2.3 / Ver.3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable
  • Color processing
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Camera

DDU1207MG Specifications table
Model DDU1207MG
Interface USB3.1 Gen1 (USB3.0) (Only SuperSpeed is supported) / 2 channels
Pixels 12.3M
Imager CMOS image sensor
Imager model IMX253LLR
Resolution 4,096(H) x 3,000(V)
Frame rate 62fps (Dual USB, Mono 8bit)
31fps (Single USB, Mono 8bit)
Pixel size 3.45μm x 3.45μm
Scanning area 14.13mm(H) x 10.35mm(V)
Image size 1.1 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method MANUAL : Global shutter / Random Trigger Shutter : Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL : 30μs to 16s
AE : 30μs to 1s
Random Trigger Shutter : 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
Optical glass/filter Dust-proof glass
Sensitivity 1,600 lx
(F5.6, 1/62s)
Minimum illuminance 4 lx
(F1.4, Gain: +24dB, Video level: 50%)
Gain MANUAL : 0 to +24dB, AGC : 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
Image Buffer 256MB / 21 frames (all pixels readout)
Image Output Format Mono 8bit / Mono 10bit / Mono 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V±5%
Power consumption 5.0W max.
Lens mount C-mount
External dimension 40(W) x 40(H) x 35(D) mm (Not including protruding parts)
Mass approx. 90g
Operation temperature -5°C to 45°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Color Cameras

DDU1207MCG / DDU1207MCF Specifications table
Model DDU1207MCG DDU1207MCF
Interface USB3.1 Gen1 (USB3.0) (Only SuperSpeed is supported) / 2 channels
Pixels 12.3M
Imager CMOS image sensor
Imager model IMX253LQR
Resolution 4,096(H) x 3,000(V)
Frame rate 62fps (Dual USB, Bayer 8bit)
31fps (Single USB, Bayer 8bit)
Pixel size 3.45μm x 3.45μm
Scanning area 14.13mm(H) x 10.35mm(V)
Image size 1.1 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method MANUAL : Global shutter / Random Trigger Shutter : Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL : 30μs to 16s
AE : 30μs to 16s
Random Trigger Shutter : 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter Dust-proof glass IR Cut Filter
Sensitivity 2,300 lx
(F5.6, 1/62s)
2,800 lx
(F5.6, 1/62s)
Minimum illuminance 6 lx
(F1.4, Gain: +24dB, Video level: 50%)
6 lx
(F1.4, Gain: +24dB, Video level: 50%)
Gain MANUAL : 0 to +24dB, AGC : 0 to +24dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
White balance Manual white-balance / One-push white-balance
Image Buffer 256MB / 21 frames (all pixels readout)
Image Output Format Bayer 8bit / Bayer 10bit / Bayer 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V±5%
Power consumption 5.0W max.
Lens mount C-mount
External dimension 40(W) x 40(H) x 35(D) mm (Not including protruding parts)
Mass approx. 90g
Operation temperature -5°C to 45°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Other Documents

Thermal design guide line