TOSHIBA TELI CORPORATION

Dual USB3 Camera DDU series (CMOS, High performance)

DDU1607MG / DDU1607MCG / DDU1607MCF

Dual USB3 Camera DDU series (CMOS, High performance) DDU1607M series

USB3 Vision logo

  • Dual USB3
  • 16 MP
  • 1.1 type
  • GS-CMOS
  • B/W
  • Color
  • 47 fps
  • TeliCore
  • Bus synchronization
  • Bulk trigger
  • image buffer
  • Sequential Shutter

The DDU1607M Series is an integrated CMOS camera with two USB 5Gbps (USB3.1 Gen1) interface.
For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This product is a 3 year warranty correspondence.

See other Dual USB3 Camera DDU series

Contact us

Key Features

  • Featuring Teli original IP "Teli Core Technology"
  • High frame rate
  • Global shutter
  • Adjustment by high-quality and high reliability productive facilities
  • USB 5Gbps (USB3.1 Gen1) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver.2.4 / Ver.3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Camera

DDU1607MG Specifications table
Model DDU1607MG
Interface USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) / 2 channels
Pixels 16M
Imager CMOS image sensor
Imager model XGS16000
Resolution 4,000(H) x 4,000(V)
Frame rate 47fps (Dual USB, Mono 8bit)
23fps (Single USB, Mono 8bit)
Pixel size 3.2μm x 3.2μm
Scanning area 12.80mm(H) x 12.80mm(V)
Image size 1.1 type
Aspect ratio 1:1
Scanning Progressive
Electronic shutter method MANUAL: Global shutter / Random Trigger Shutter: Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 30μs to 16s
Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
Optical glass/filter Dust-proof glass
Sensitivity 2,700 lx
(F8, 1/50s)
Minimum illuminance 6 lx
(F1.4, Gain: x8, Video level: 50%)
Gain MANUAL: x1 to x8, AGC: x1 to x8
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
Image Buffer 256MB / 16 frames (all pixels readout)
Image Output Format Mono 8bit / Mono 10bit / Mono 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V ±5%
Power consumption 5.3W max.
Lens mount C-mount
External dimension 40(W) x 40(H) x 35(D) mm (Not including protruding parts)
Mass approx. 90g
Operation temperature -5°C to 45°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Color Cameras

DDU1607MCG / DDU1607MCF Specifications table
Model DDU1607MCG DDU1607MCF
Interface USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) / 2 channels
Pixels 16M
Imager CMOS image sensor
Imager model XGS16000
Resolution 4,000(H) x 4,000(V)
Frame rate 47fps (Dual USB, Mono 8bit)
23fps (Single USB, Mono 8bit)
Pixel size 3.2μm x 3.2μm
Scanning area 12.80mm(H) x 12.80mm(V)
Image size 1.1 type
Aspect ratio 1:1
Scanning Progressive
Electronic shutter method MANUAL: Global shutter / Random Trigger Shutter: Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entries (max)
Exposure Time MANUAL: 30μs to 16s
Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter Dust-proof glass IR Cut Filter
Sensitivity 2,700 lx
(F5.6, 1/50s)
3,300 lx
(F5.6, 1/50s)
Minimum illuminance 11 lx
(F1.4, Gain: x8, Video level: 50%)
13 lx
(F1.4, Gain: x8, Video level: 50%)
Gain MANUAL: x1 to x8, AGC: x1 to x8
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 12bit, Out 12bit
White balance Manual white-balance / One-push white-balance
Image Buffer 256MB / 16 frames (all pixels readout)
Image Output Format Bayer 8bit / Bayer 10bit / Bayer 12bit
Readout Mode All pixel, Scalable, Binning, Decimation, Mirroring, Flip
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V ±5%
Power consumption 5.3W max.
Lens mount C-mount
External dimension 40(W) x 40(H) x 35(D) mm (Not including protruding parts)
Mass approx. 90g
Operation temperature -5°C to 45°C (below 60°C on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Introduction Video


Introduction video of the demonstration at the exhibition "ITE2020" .