Dual USB3 Camera DDU series (CMOS, High performance)
DDU2607MG / DDU2607MCG / DDU2607MCF
- Dual USB3
- 26.2 M
- 1.1 type
- GS-CMOS
- B/W
- Color
- 28.4 fps
- TeliCore
- Bus synchronization
- Bulk trigger
- image buffer
- Sequential Shutter
The DDU2607M Series is an integrated CMOS camera with two USB 5Gbps (USB3.1 Gen1) interface.
For video output and camera control, the USG 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This product is a 3 year warranty correspondence.
Key Features
- Featuring Teli original IP "Teli Core Technology"
- High frame rate
- Global shutter
- Adjustment by high-quality and high reliability productive facilities
- USB 5Gbps (USB3.1 Gen1) interface
- USB3 Vision Ver.1.0 conformity
- GenICam conformity Ver.2.4 / Ver.3.0
- IIDC2 Digital Camera Control Specification Ver.1.1.0
- e-CON Connector adoption
- Scalable
- Square grid arrangement
- Random Trigger Shutter
Specifications
B/W Camera
| Model | DDU2607MG |
|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) / 2 channels |
| Pixels | 26.2M |
| Imager | CMOS image sensor |
| Imager model | GMAX0505 |
| Resolution | 5,120(H) x 5,120(V) |
| Frame rate | 28.4fps (Dual USB, Mono 8bit) 14.4fps (Single USB, Mono 8bit) |
| Pixel size | 2.5μm x 2.5μm |
| Scanning area | 12.80mm(H) x 12.80mm(V) |
| Image size | 1.1 type |
| Aspect ratio | 1:1 |
| Scanning | Progressive |
| Electronic shutter method | MANUAL: Global shutter / Random Trigger Shutter: Global shutter |
| Random Trigger Shutter Type | External Trigger / Software Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | 16 entries (max) |
| Exposure Time | MANUAL: 25μs to 16s AE: 25μs to 1s Random Trigger Shutter: 25μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
| Synchronization System | Internal / Bus (USB) |
| Optical glass/filter | Dust-proof glass |
| Sensitivity | 1,300 lx (F8, 1/28.6s) |
| Minimum illuminance | 2 lx (F1.4, Digital Gain: x8, Analog Gain: x2, Video level: 50%) |
| Digital Gain | MANUAL: x1 to x8, AGC: x1 to x8 |
| Analog Gain | MANUAL: x1 to x2 |
| Black Level | -25% to +25% |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit |
| Sharpness | 0 ~ 7 |
| Image Buffer | 256MB / 10 frames (all pixels readout) |
| Image Output Format | Mono 8bit / Mono 10bit / Mono 12bit |
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
| Power supply | DC5V ±5% |
| Power consumption | 5.6W max. |
| Lens mount | C-mount |
| External dimension | 40(W) x 40(H) x 35(D) mm (Not including protruding parts) |
| Mass | approx. 90g |
| Operation temperature | -5°C to 45°C (below 60°C on cabinet surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 |
Color Cameras
| Model | DDU2607MCG | DDU2607MCF |
|---|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) / 2 channels | |
| Pixels | 26.2M | |
| Imager | CMOS image sensor | |
| Imager model | GMAX0505 | |
| Resolution | 5,120(H) x 5,120(V) | |
| Frame rate | 28.4fps (Dual USB, Bayer 8bit) 14.4fps (Single USB, Bayer 8bit) |
|
| Pixel size | 2.5μm x 2.5μm | |
| Scanning area | 12.80mm(H) x 12.80mm(V) | |
| Image size | 1.1 type | |
| Aspect ratio | 1:1 | |
| Scanning | Progressive | |
| Electronic shutter method | MANUAL: Global shutter / Random Trigger Shutter: Global shutter | |
| Random Trigger Shutter Type | External Trigger / Software Trigger | |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) | |
| Sequential Shutter | 16 entries (max) | |
| Exposure Time | MANUAL: 25μs to 16s AE: 25μs to 1s Random Trigger Shutter: 25μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
|
| Synchronization System | Internal / Bus (USB) | |
| On-chip Color Filter | RGB primary color mosaic-on-tip color filter | |
| Optical glass/filter | Dust-proof glass | IR Cut Filter |
| Sensitivity | 2,040 lx (F8, 1/28.6s) |
2,470 lx (F8, 1/28.6s) |
| Minimum illuminance | 2 lx (F1.4, Digital Gain: x8, Analog Gain: x2, Video level: 50%) |
3 lx (F1.4, Digital Gain: x8, Analog Gain: x2, Video level: 50%) |
| Digital Gain | MANUAL: x1 to x8, AGC: x1 to x8 | |
| Analog Gain | MANUAL: x1 to x2 | |
| Black Level | -25% to +25% | |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit | |
| White balance | Manual white-balance / One-push white-balance | |
| Image Buffer | 256MB / 10 frames (all pixels readout) | |
| Image Output Format | Bayer 8bit / Bayer 10bit / Bayer 12bit | |
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip | |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
|
| Power supply | DC5V ±5% | |
| Power consumption | 5.6W max. | |
| Lens mount | C-mount | |
| External dimension | 40(W) x 40(H) x 35(D) mm (Not including protruding parts) | |
| Mass | approx. 90g | |
| Operation temperature | -5°C to 45°C (below 60°C on cabinet surface) | |
| Operation humidity | 10% to 90% (no condensation) | |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 | |
