CoaXPress 2.0 Camera EX series (CMOS, High performance)


CoaXPress 2.0 Camera EX series (CMOS, High performance) EX370BMG-X

coaxpress logo

  • CoaXPress 2.0
  • 37.7 MP
  • APS-C
  • 4/3 type
  • B/W
  • 120 fps
  • TeliCore
  • Lens mount-less

EX370BMG-X Series is an integrated camera with a CoaXPress 2.0 interface.
Incorporating a 37.7MP CMOS sensor, the EX Series provides a wide field of view.
The use of CXP-12 Quad allows high speed transfer of images.
Measuring only 60 mm square, the chassis can be installed easily.
The lens-mountless structure makes it possible to use different lenses according to the application requirements.

See other CoaXPress 2.0 Camera EX series

Contact us

Key Features

  • e2v 37.7MP CMOS sensor
  • TELI original IP core
  • Global electronic shutter
  • CoaXPress 2.0 interface
  • 50Gbps transfer bandwidth provided by CXP-12 Quad
  • GenICam conformity
  • IIDC2 Digital Camera Control Specification
  • Square grid array
  • Camera control / image acquisition by TeliCamSDK


B/W Camera

EX370BMG-X Specifications table
Model EX370BMG-X
Interface CoaXPress 2.0
Pixels 37.7M
Imager CMOS image sensor
Imager model EV2S36MB
Resolution 6,144(H) x 6,144(V)
Frame rate 120 fps (CXP-12 Quad, Mono 8bit)
42.1 fps (CXP-6 Quad, Mono 8bit)
21 fps (CXP-12, Mono 8bit)
10.7 fps (CXP-6, Mono 8bit)
Pixel size 2.5μm x 2.5μm
Scanning area 15.36mm(H) x 15.36mm(V)
Image size 4/3 type
Aspect ratio 1:1
Scanning Progressive
Electronic shutter method Global shutter
Random Trigger Shutter Type External Trigger / Software Trigger / Link Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter 16 entry (max)
Exposure Time MANUAL: 10μs to 16s
Random Trigger Shutter: 10μs to 1s (Edge or Bulk mode), 200μs to Trigger width (Level mode)
Synchronization System Internal
Optical glass/filter Dust-proof glass
Sensitivity 2,350 lx
(F5.6, 1/125s)
Minimum illuminance 2 lx
(F1.4, Gain: +36dB, Video level: 50%)
Gain MANUAL: 0 to +36dB
Black Level -25% to +25%
LUT In 12bit, Out 12bit
Image Output Format Mono12, Mono10, Mono8
Readout Mode All pixel, Scalable, Binning, Mirroring, Flip
External trigger input "Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 200μs (minimum)
Power supply PoCXP / DC+24V (18.5V to 26V) (HIROSE connector)
Power consumption 13.6W max.
Lens mount Mountless (Φ50 H7)
External dimension 60(W) x 60(H) x 80(D) mm (Not including protruding parts)
Mass approx. 280g
Operation temperature 0°C to 40°C (below 60°C on cabinet surface, below 75°C on image sensor)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, CoaXPress 2.0, GenICam, IIDC2

Introduction Video

Introduction video of the demonstration at the exhibition "ITE2020".