USB3 Camera BU series (CCD, Compact)

BU030 / BU030C / BU030CF / BU031 / BU130

USB3 Camera BU series (CCD, Compact) BU030 / BU030C / BU030CF / BU031 / BU130

USB3 Vision logo

  • USB3
  • 0.3 MP
  • 1.3 MP
  • 1/3 type
  • 1/2 type
  • CCD
  • B/W
  • Color
  • 125 fps
  • 30 fps
  • TeliCore
  • Bus synchronization
  • Bulk trigger

This BU series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD or CMOS.
For video output and camera control, the USB3.1 Gen1 (USB3.0) interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.

Key Features

  • High frame rate
  • USB3.1 Gen1 (USB3.0) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver2.3
  • IIDC2 Digital Camera Control Specification Ver.1.0.0
  • e-CON Connector adoption
  • Scalable
    Frame rate calculation tool
    (BU series CMOS camera)
  • Color processing(BU030C[F]/BU130C[F])
  • Square grid arrangement
  • Random Trigger Shutter

Specifications

B/W Cameras

Key Features table
Model BU030 BU031 BU130
Interface USB3.1 Gen1 (USB3.0) (Only SuperSpeed is supported)
Pixels 0.3M 1.3M
Imager All-pixel-data-readout interline transfer CCD
Imager model ICX424AL ICX414AL ICX445AL
Resolution 640(H) x 480(V) 1,280(H) x 960(V)
Frame rate 125fps (Mono 8bit) 30fps (Mono 8bit)
Pixel size 7.4μm x 7.4μm 9.9μm x 9.9μm 3.75μm x 3.75μm
Scanning area 4.74mm(H) x 3.55mm(V) 6.34mm(H) x 4.75mm(V) 4.80mm(H) x 3.60mm(V)
Image size 1/3 type 1/2 type 1/3 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method MANUAL / Random Trigger Shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter -
Exposure Time MANUAL : 10μs to 16s
Random Trigger Shutter : 10μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
MANUAL : 30μs to 16s
Random Trigger Shutter : 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
Optical glass/filter -
Sensitivity 1,700 lx
(F5.6, 1/125s)
1,300 lx
(F8, 1/30s)
Minimum illuminance 7 lx
(F1.4, Gain: +18dB, Video level: 50%)
3 lx
(F1.4, Gain: +18dB, Video level: 50%)
Gain MANUAL : 0 to +18dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 10bit, Out 10bit
Image Buffer -
Image Output Format Mono 8bit / Mono 10bit
Readout Mode All pixel, Scalable, Binning All pixel, Scalable
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V±5%
Power consumption 2.6W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 13(D) mm (Not including protruding parts)
Mass approx. 27g
Operation temperature 0℃ to 40℃ (below 50℃ on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Color Cameras

Key Features table
Model BU030C BU030CF
Interface USB3.1 Gen1 (USB3.0) (Only SuperSpeed is supported)
Pixels 0.3M
Imager All-pixel-data-readout interline transfer CCD
Imager model ICX424AL
Resolution 640(H) x 480(V)
Frame rate 125fps (Bayer 8bit)
Pixel size 7.4μm x 7.4μm
Scanning area 4.74mm(H) x 3.55mm(V)
Image size 1/3 type
Aspect ratio 4:3
Scanning Progressive
Electronic shutter method MANUAL / Random Trigger Shutter
Random Trigger Shutter Type External Trigger / Software Trigger
Random Trigger Shutter Mode Edge / Level / Bulk (255 times)
Sequential Shutter -
Exposure Time MANUAL : 10μs to 16s
Random Trigger Shutter : 10μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System Internal / Bus (USB)
On-chip Color Filter RGB primary color mosaic-on-tip color filter
Optical glass/filter -
Sensitivity 3,500 lx
(F5.6, 1/125s)
4,200 lx
(F5.6, 1/125s)
Minimum illuminance 14 lx
(F1.4, Gain: +18dB, Video level: 50%)
17 lx
(F1.4, Gain: +18dB, Video level: 50%)
Gain MANUAL : 0 to +18dB
Black Level -25% to +25%
Gamma / LUT γ=1.0 to 0.45 / In 10bit, Out 10bit
White balance Manual white-balance / One-push white-balance
Image Buffer -
Image Output Format RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit, Bayer 8bit / Bayer 10bit
Readout Mode All pixel, Scalable
External trigger input Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply DC5V±5%
Power consumption 2.7W max.
Lens mount C-mount
External dimension 29(W) x 29(H) x 13(D) mm (Not including protruding parts)
Mass approx. 27g
Operation temperature 0℃ to 40℃ (below 50℃ on cabinet surface)
Operation humidity 10% to 90% (no condensation)
Conformity CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2
 

Other Documents

About the change of GPIO output signal specifications of the BU series

As shown in the following information, GPIO output signal specifications of the BU series will be changed because of improving both noise resistance performance and convenience of use.

Applicable products

BU030, BU031, BU080, BU130

Contents of change

Contents of change table
Before change After change
Output channel 1 channel 2 channel
Output signal TIMER0 ACTIVE、USER OUTPUT、EXPOSURE ACTIVE、FRAME ACTIVE、FRAME TRANSFER、FRAME TRIGGER WAIT
Output level LVTTL 5V CMOS
Polarity High active / Low active (factory setting : Low active)

Serial No. of change applied.

Change will be applied after the following manufacturing serial number.

  • BU030 0100131~

  • BU031 0100061~

  • BU080 0100041~

  • BU130 0100196~

Others

If you already used those products, please confirm carefully compatibility with the input circuit of your systems.
There is not a problem in particular in case that you apply TTL buffer of +5V to your system.But if you apply LVTTL buffer to your system, please confirm the permissible voltage range of that.

Specifications/Operation Manual before change
Manual

Specifications BU series USB3 Old

Operation Manual BU series USB3 Old

Thermal design guide line